Jump to content
SAU Community

Recommended Posts

600hp: 367awkw is impressive from those turbos! I have always thought they were capable of an output up in that range. But never had any proof until now. I think that is definately enough power to run a 10.

Cefiro_PWA: For a comparison, when I first got my car I ran an 11.99 @115.4 mph with:

Stock turbos and dumps, 3" inch front pipes and cat back

trust pod filters

trust intercooler

17 psi boost

Jap chipped ECU

217rwkw

Then I added a PFC, Z32 afm's and cam gears and it made 273rwkw. On a very hot day when noticeably down on power (intake temp at 66 deg) I ran an 11.6 @ 118 mph. This was still far from the potential of the car.

There are many GTR's up here with heaps more power but getting worse times. Just goes to show that there is more to it than peak power outputs.

  • Replies 96
  • Created
  • Last Reply

Top Posters In This Topic

600hp:  367awkw is impressive from those turbos!  I have always thought they were capable of an output up in that range.   But never had any proof until now.  I think that is definately enough power to run a 10.

Cefiro_PWA:  For a comparison, when I first got my car I ran an 11.99 @115.4 mph with:

Stock turbos and dumps, 3" inch front pipes and cat back

trust pod filters

trust intercooler

17 psi boost

Jap chipped ECU

217rwkw

Then I added a PFC, Z32 afm's and cam gears and it made 273rwkw.  On a very hot day when noticeably down on power (intake temp at 66 deg) I ran an 11.6 @ 118 mph.  This was still far from the potential of the car.

nice work wish i could get a GTR i wanna have a go and just getting inthe low 12s

Welll, I am just here to say something...

My fren has a std GTR.. He ran constant 11.94 @ 114/113MPH.

3" front , stock Dump pipe. 4" cat back.

Blitz Twin Entry Intercooler

ARC Airbox

17psi boost.

255 street tyres on 18" rims.

With wider tyres say 275 he will get better traction.. but there expensive:)

Which is why i think that time of 11.7 is not impressive. Mind you its still got std ecu.

He is going to get Power FC and a custom dump pipe setup with intercooler water spray, he is aiming for 11.7 @ 116mph.

Will keep youse up to date.

If that car is running stock turbines, it won't be running anything for very long at 17PSI...

  • 2 months later...

tick tick tick doom and when i goes it will take the motor with it, i have seen 3 of these in the last year. And it's funny how these guys come out of the wood work "my mates car"

there is a big difference in this range

at 316awhp i ran 12.0 1/4mile

at 520rwhp i ran 11.3 1/4mile

so to run a 12.0 or 11.9 in gtr is not rocket science

but to get in to the mid or low 11's takes a lot more work (lot more)

tick tick tick doom and when i goes it will take the motor with it,  i have seen 3 of these in the last year. And it's funny how these guys come out of the wood work "my mates car"

there is a big difference in this range  

at 316awhp i ran 12.0 1/4mile

at 520rwhp i ran 11.3 1/4mile  

so to run a 12.0 or 11.9 in gtr is not rocket science

but to get in to the mid or low 11's takes a lot more work (lot more)

Well.. it can't "take the motor with it" because its simply only 17psi!

Ive seen 11.6 in a GTR in japan ( R33 GTR S1 ), They said it was running pump fuel ( 100RON ) and street tyre's! ( not sure what kind ).. this was only @ 1.2kg/cm2!

so around 17pounds!

just look's like half of your car's are shitty and low on compression.

Well.. it can't "take the motor with it" because its simply only 17psi!

Ive seen 11.6 in a GTR in japan ( R33 GTR S1 ), They said it was running pump fuel ( 100RON ) and street tyre's! ( not sure what kind ).. this was only  @  1.2kg/cm2!

so around 17pounds!

just look's like half of your car's are shitty and low on compression.

YES it can and very offen does as the exploding cermic wheel spend bit everywhere including back into the combustion chamber making and almightly mess of thing ,this is why people throw the std turbo asap as its cheap to replace just turbos than a motor and turbos. The std turbos are a ticking time bomb if run anything over std boost (some may last a little or alot but they all fail in the end)

YES it can and very offen does as the exploding cermic wheel spend bit everywhere including back into the combustion chamber making and almightly mess of thing ,this is why people throw the std turbo asap as its cheap to replace just turbos than a motor and turbos. The std turbos are a ticking time bomb if run anything over std boost (some may last a little or alot but they all fail in the end)

exhaust wheels are ceramic, the intake shaft is fine on the standard gtr

why would it suck inside, its an exhaust wheel... "ExHAUST" get it? exhaust?

it just comes outto the cat

only thing youd be damaging on the standard turbo's running 17psi is the turbine wheels..

anyway who cares... 11.6 is fast.

exhaust wheels are ceramic, the intake shaft is fine on the standard gtr

why would it suck inside, its an exhaust wheel... "ExHAUST" get it? exhaust?

it just comes outto the cat

only thing youd be damaging on the standard turbo's running 17psi is the turbine wheels..

anyway who cares... 11.6 is fast.

look i have seen three rb26 motor damaged in the last 12 to 18 months by this NO if but or maybe

It happen offen i didnt believe until i saw it then another and another

Don't believe me if you like your MATE may pay a very big price for it

I surgest you talk to some other tuners etc that have had experience with running std gtr hard and you will find the FIRST thing they will tell you to lose the std turbos before they fail.

look i have seen three rb26 motor damaged in the last 12 to 18 months by this NO if but or maybe  

It happen offen i didnt believe until i saw it then another and another

Don't believe me if you like your MATE may pay a very big price for it  

I surgest you talk to some other tuners etc that have had experience with running std gtr hard and you will find the FIRST thing they will tell you to lose the std turbos before they fail.

pnblight is right, I have heard of many stories of turbine wheels calling it a day and ending up in the sump....

CEFIRO_PWA - In most cases the exhaust wheel ends up in the cat, but the front wheel can go the other way!!!

P.S pnblight, I have a surprise for you, stay tuned!!!!

pnblight is right, I have heard of many stories of turbine wheels calling it a day and ending up in the sump....

CEFIRO_PWA - In most cases the exhaust wheel ends up in the cat, but the front wheel can go the other way!!!

P.S pnblight, I have a surprise for you, stay tuned!!!!

Please do tell i am every the ear to good story Man how does not listen is a fool? as i know as much as anyone, to listen as you can learn a from those who how have been there in the past.

please do tell jagr33 ,

pete

exhaust wheels are ceramic, the intake shaft is fine on the standard gtr

why would it suck inside, its an exhaust wheel... "ExHAUST" get it? exhaust?

it just comes outto the cat

only thing youd be damaging on the standard turbo's running 17psi is the turbine wheels..

anyway who cares... 11.6 is fast.

Tell your mate to either back to boost off to under 1 bar or get rid of the stock ceramic turbos . Its only a matter of time before they let go and guess what the engine will be full of ceramic dust , a sand like material that will score the bore and may bent a valve or two .

There is nothing wrong with the stock turbos and yea you can get plenty of power out of them . The reason people change them is the CERAMIC wheel s let go and damage the engine in most cases .

I dont blame you for not understanding how it happens but believe me it DOES i have seen several engines go when they spit the turbos .

The first thing i did on my 34 is replace the turbos with gtss's . The stock turbos are not much smaller and they spool up earlier but i can take the risk of destroying an almost new engine .

hey Jerry, how is it all going???? Im off to BEL 2moro to add a few goodies, and then it will need a dyno tune once I get back from work on the 10th....

Its all good with me , heading to wsid on wednesday , weather permiting to put bens tune to the test .

What are you doing to it now ?

What dyno are you taking it to ?

I will put mine on the dyno as well but i only trust one Dyno and thats in south coast .

I think Paul ( ozgtr02v) wants to put his 34 r on the same dyno so we can compare the 2 cars .

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...