Jump to content
SAU Community

Recommended Posts

lifespan of a cat is about 5 years, after that they become useless.. and can actually impede flow.

Sure, they might *look* fine, but the honeycomb material is involved in a chemical reaction in converting the CO (and whatever other chemicals it is engineered to attract).. once its spent, no more cat reaction = cat useless..

yeah, so then you come to me and say "hey Dan, can you buy me one of those super dooper cat's from your work for $170?"

And I say sure...no problems.

You could go the ultra high flow cats which are now available. They are around $240 and flow an extra 40% or so. They are a much larger body though so you have to be aware of space for it.

You forgot Step 6. Get pulled over by transport inspectors who tell you your cat is hollow because of the poisonous gases bellowing out the back

and Step 7. Get fined up to $5000 depending on how 'aware' you were that it was hollow.

If you have the cat casing still on, but just hollow, you can only be fined for emissions...

I know a guy with a hollowed cat, you cant see the gasses coming out, it has to be taken to an inspection station for a test to concluded that, even then see above.

and the fine is on a per cylinder basis AFAIK.

:D for a uselesspost.

Back on topic: The gain from a highflow cat would be VERY minimal maybe 3rwkw max...

haha. They can actually do a gas analysis on the side of the road. And with one of those, you can tell if there is no material in the cat. Your Nitrous Oxides would be through the roof. And as for that, once they find that your cat is hollow....coz any idiot can tell the difference with an analyser, you get a machinery and they fine you. The fine is up to $5000 depending on your involvement.

Thankyou for wasting my time for having to explain it. ;)

put your hands around your neck and squeeze tight, now try and breath out....

same thing in your exhaust, you totally have defeated the purpose to having a highflowing exhaust, especially if you have the original cat which is more than likley blocked having had a high fuel load dumped into it over the years as well as heat which is associated with running more boost.

mine the front side of it melted and was practicly completly blocked when i last replaced it.

also if your planning on gutting a cat just bear in mind that the contents of the honeycomb is reportedly carsonogenic (sp?) (that said you can get cancer from scratching your armpit these days so why worry eh?)

i got my replacement cat from batmbl as well, he was very good to deal with.

as gordon said before, after 5 or so years they are useless, the fronts become melted and blocked and the honeycomb is no longer effective, replacing it with something capable of flowing more and converting more gas is a much better investment than replacing it with another stocker

Im not exactly sure what size my cat-back exhaust is... the previous owner told me the spec of it but i forgot... what i do remember is that its bigger than 3 inches... its either 3.25" or 3.5"...

Now the question is, will have to find a cat with the same size ends? Or will standarad 3" hiflow cat do the job? I just dont wanna end up buying a cat that doesnt fit, or even worse, going to a muffler joint to get them to measure it and find out after paying them $$$ that it would have fitted!

The intuitive response would be that the same size cat would be required but im asking bcoz currently with the cat back exhaust, the bigger exhaust pipe is attached to the smaller stock cat... If you get what i mean...

Also, is it possible to put your car up on a jack and replace the cat yourself with some backyard tools? Is it a complicated process?

Anyway, any help much appreciated!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...