1350kg + 180-200rwkw - Anyone suggest an ET and 60ft time?

[someonestolecc]

Gday,

My car weight = 1350kg (yeah subs, sound deadening and zip ties)

2 dynos.. one said 180 the other said 200rwkw.

Can anyone tell me the ET and 60ft time I'd be expecting first time down the quarter?

I realise suspension and tyres make a difference and currently they're hard coilovers + low profiles, so I'm not expecting good times but would still appreciate a guesstimation within a second.

I'm wondering if I could get 13 with around 2.4 60" ??

Thanks

[ECR033]

I'm wondering if I could get 13 with around 2.4 60" ??

Thanks

Just to give you a comparison, I ran a 13.7 (2.4 60") in my R33 which would be a similar weight (perhaps a little heavier). When I ran the car, it was making 185rwkw.

Similar power, similar weight - i'll let you draw your own conclusions on an approx ET you would run

[KamikazeR33]

my r33 ran a 13.9 with 169rwkws b4 i bought it

havent run it since

[R31Nismoid]

i ran a 12.9 @ 109 mph... 1400KG... with 210rwkw

[someonestolecc]

Thanks guys.

So hopefully with the subs out, more boost (210-220rwkw) and some OK driving I should see mid-low 13's. Good to know.

Just out of interest did you guys use stock suspension or coilovers? And lo-pro tyres?

Thanks.

[Robo's]

Had 207rwkw in a R33GTST and ran 12.98

[Roy]

Yeh i did a 13.4 @ 108mph with a 2.2 60ft with semi slicks, firm suspension with camber etc set up for the track wiht around 190, 200rwkw max.

With the same setup and 215rwkws i just ran a 12.9 @ 113mph, 2.2 60ft

[BU5TER]

Guys buy some drag radials and run what your cars are really capable of like 1.6-1.8 60fts which would put Roy into the 11's

[Abo Bob]

Maybe a bunch of us should pool our dosh for 2 rims and 2 tyres that we can share.

How many runs would you get out of a set roughly?

[Robo's]

Guys buy some drag radials and run what your cars are really capable of like 1.6-1.8 60fts which would put Roy into the 11's

Im after a true street time with my street tyres. Not interested in a time card i can only run 1% of the time.

[someonestolecc]

Yeah it'd be nice to borrow someones set of radials and take out my subs and spare tyre etc for 1 or 2 runs so I can say I dipped into 11's or 12's (if it's possible). But really I'd like to also know the time my car runs with subs, petrol and spare wheel on lo-pros.. ie. how it is on the street

But thanks guys this is making me optimistic that with some practice I could hit mid low 13's and maybe even high 12's.

Thanks everyone!! (ps. bob if you end up getting a set I'd like to pay for 1 use one day heh)

[Roy]

Im still looking good for those tyres, just trying to par up someone down here to go halvies with me:) I need new semi slicks as well for track days that are coming up and the prospect of having to spend close to $3,000 on rubber scares me:(

[Robo's]

How about RE55's or the Toyo Prozies, apparently they are a pretty good for the strip/street

[someonestolecc]

Holy crap Roy 3 gorillas for tyres!! No freakin way I'm sorry but $3k you can make up the lap times with more power or suspension

You seriously chasing the seconds ay?

[Roy]

Not really, its just that the car needs good rubber to get the power down, so that $1800 for the Dunlops for track and street, and i want to grab the BF Good rich drag radial and soem 16s to see if i can run around a 12.2:) So there you go 3k:(

And the susp i want isnt available yet, so am waiting for it to come onto the market , otherwise i have to spend about 1k more on an equivelant setup that is currentyl available.

[Abo Bob]

I've got some RE55's already. It's not the same though I don't think. What if you wait an hour for a run then they are cold so you do a burnout and waste half of them then I wont have them for the track.

I suppose I'm just whinging and drag radials would get half wasted doing burnouts anyway.

[Roy]

...What if you wait an hour for a run then they are cold so you do a burnout and waste half of them then I wont have them for the track.  

...

Can you see me screaming "NOOOO!!!...my poor tyres!!!:("

Burnouts at the drags with 24psi DOES knock around the D01Js:(

But apparantly its the thing to do, so when at Calder...

[Roy]

...What if you wait an hour for a run then they are cold so you do a burnout and waste half of them then I wont have them for the track.  

...

Can you see me screaming "NOOOO!!!...my poor tyres!!!:("

Burnouts at the drags with 24psi DOES knock around the D01Js:(

But apparantly its the thing to do, so when at Calder...

Sorry..shameless posting of pics...i have hand feeds over these photos:)

[spx25t]

My skyline weighs 1400kgs and with only 175kw(235hp) at the rear wheels on street tyres with sub in the boot spare tyre jack everything i ran a best of 13.60 at 102 mph with a 2.1 60ft with TRX rims which are only 6 inch wide. the only advantage i have is that with the 31 i do not have IRS so better intial traction. I am running 33 motor and box so the diff is the only difference but the ratio is about 3.8:1.

also i had dropped tyre pressures down to 20 pounds

since then have had the car tuned properly and now making 182kw's at the wheels and having rebuilt the LSD am waiting to run again hopefully lower in the 13's

[someonestolecc]

Hmm wonder how my 235/40/18's Nankang (WOO GO THE CHEAPOS!) will go?

Ahh who cares I just wanna run it once or twice and see what I get. If anyone from here is going in the next month or two to the 1/4 please let me know so I can ask some q's and run with you

Cheers guys.