Jump to content
SAU Community

Recommended Posts

  • Replies 154
  • Created
  • Last Reply

Top Posters In This Topic

Well I want to go for a cruise, and I know Ewen and Andrew (skygtrline) seem keen for a cruise... so Im goin for a cruise :D Anyone who wishes to come along is more than welcome.

-- MEETING DETAILS --

WHEN: Saturday 21st May, 9:30AM for 10:00AM departure

WHERE: Gull service station, Monaro Highway Hume.

-- WHERE IM GOING --

Cruising down through Cooma and Jindabyne, then onto Alpine way up to Charlottes Pass via Perisher Blue. Yes it will be cold, yes if its raining it will be icy and I probably wont go. Other than that, roads should be fine, theyre good roads as well ("serviced" every year), nice and wide with open sweeping corners. Theres also BP Ultimate availible on both Cooma and Jindabyne for all your petrol supplies (albeit, usually 5 - 10c per litre more than what we pay here). Should get to Charlottes Pass by 1:00PM, dick around, frolick in the snow, then head back towards Jindabyne for some food and a drink/beer/whatever.

If you want in, just say so here and will see you on the day :P

EDIT: Theres also a $16 cost per vehicle to enter the national park. So its not "cheap" as compared to a small cruise to Orroral etc, but it is a fun drive, nice and scenic and long, and cold weather = cars like to boost more :)

EDIT AGAIN: At this point in time, I have posted this on Shogun forums as well and would prefer it not to go onto any other forums. There -WILL- be police heading down to cooma at least, and possibly even up to Jindabyne (ski season starts 2 weeks after this cruise, so they will be upping their presence) and trying to avoid any unsocial behaviour some other unamed clubs have displayed in the past. The police down that way are a very friendly bunch, and will not have any problems with us as long as were not doing any obvious forms of dangerous driving (aka "FULLY SIK DORIFTO BRO~!")

So is this still a keen happening thing???

They -should- be fine unless it,

(a) Rains and the temperature is in the minuses

(B) It snows

Long-range forecast is (or was) predicting a big dump of snow around the 19th. The ground isnt cold enough for the snow to stay (each season, you need a big dump of rain or snow to cool the ground, then a base can begin) so if it comes through it should be OK when we go up. I have no worries about the road up to Perisher, if it does snow though the road from Perisher to Charlottes Pass may be closed... guess theres only one way to find out :D

Irregardless, entering the national park past Jindabyne where you have to pay the toll, the people there will advise us of road condition and if its unsafe to enter. But as said above, the roads should be a-ok :)

SNOW OMGGGGGGGGggggggggggggggggg

They -should- be fine unless it,

(a) Rains and the temperature is in the minuses

(B) It snows

Long-range forecast is (or was) predicting a big dump of snow around the 19th. The ground isnt cold enough for the snow to stay (each season, you need a big dump of rain or snow to cool the ground, then a base can begin) so if it comes through it should be OK when we go up. I have no worries about the road up to Perisher, if it does snow though the road from Perisher to Charlottes Pass may be closed... guess theres only one way to find out :D

Irregardless, entering the national park past Jindabyne where you have to pay the toll, the people there will advise us of road condition and if its unsafe to enter. But as said above, the roads should be a-ok :)

I'm psyched for this...even if we only get to Jindabyne and get one of the famous Kebabs i've heard so much about, eh Nik :)

shhh dont mention the kebab, people will think i have alterior motives :)

Time to reminisce about my cruise down last year...

gtrinsnow-new.jpg

gtrinsnow2-new.jpg

There was scattered snow from about 5 minutes out of Canberra to about 5 minutes past Cooma, and the rest of the way to Perisher was completely white :) That was a really good dump of snow.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...