Jump to content
SAU Community

Recommended Posts

All rebuilt...runnin in...finally get a few k's on er and give it a bit.

Doesn't really splutter, more of a hesitation

Feels like it wants to go, but mellow's out.

Goin at 0.6 bar steady..so I don't think its leaking.

I have a nisdat..timings ok, oxygen and af sensors seem fine.

It doesn't seem to retard as though the knock sensors are kicking in.

New battery, newly flowed infectors, new plugs...like I said it doesn't splutter like a lack of fuel or spark.

At a guess its electrical...any thoughts

Link to comment
https://www.sau.com.au/forums/topic/70904-rebuilt-gtrnot-enough-go/
Share on other sites

Mine feels exactly the same.. Basically no notisable problems just no power..

Id get it on the dyno and see how much power shes putting down and check the af's.. PM me if you find the problem .. :spank:

All rebuilt...runnin in...finally get a few k's on er and give it a bit.

Doesn't really splutter, more of a hesitation

Feels like it wants to go, but mellow's out.

Goin at 0.6 bar steady..so I don't think its leaking.

I have a nisdat..timings ok, oxygen and af sensors seem fine.

It doesn't seem to retard as though the knock sensors are kicking in.

New battery, newly flowed infectors, new plugs...like I said it doesn't splutter like a lack of fuel or spark.

At a guess its electrical...any thoughts

yeah about 600..but I still would have thought as revs pickup power would too.

Another strange thing...my boost controller doesn't work now...but electrically does.

Something is cutting, I'm sure of it..fuel,boost??

Weekend will reveal I hope. Got a new fuel pump happenin and another gtr to swap stuff.

If I'm game, i'll free boost it in 3rd and take my foot off as soon as it goes over 0.7 as it only does 0.6 now.

sounds like boost leak or boost control issue, are all inlet hose fitted correctly??

very easy to miss a hose!! i have recently fitted a brand new engine to gtr and

tight will very little effect on boost achievable.

i also doubt fuel is issue.

it really does sound like leak or control issue, maybe turbo actuators partially open.

also check that you blo off valves are not leaking.

cheers russell

Has the engine been run in properly?

 

I wouldn't be reving upto 6k inless you have done atleast 1,000k's.... Before then you should be reving to 3k.

Lots and lots and lots of theorys on how to run an engine in...

But yeah, Id say how all your little hoses are hooked up, just if stuff was working before, and isnt now, its more than likey going to be something small that would be easy missed. Such as forgetting to put a piston in, thats big stuff, it just wouldnt happen. Putting a little hose on the wrong nipple, thats easy as to miss.

Has the engine been run in properly?

 

I wouldn't be reving upto 6k inless you have done atleast 1,000k's.... Before then you should be reving to 3k.

thats a myth

My car, bedded in on the dyno, and been runnning 16psi ever since, 7800rpm limiter no probs

nearly 6000km's and i have no problems. car runs fine, makes the same power as it did from day one.

thats a myth

My car, bedded in on the dyno, and been runnning 16psi ever since, 7800rpm limiter no probs

nearly 6000km's and i have no problems. car runs fine, makes the same power as it did from day one.

Didn't you have a turbo problem :cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know how your car rolled through a fence in your last jacking escapade? Scissor jacks increase the likely hood of that sort of thing happening immensely!
    • http://calfinn.com.au/product/1500kg-standard-trolley-jack-cj-2t-c/1500kg-standard-trolley-jack-cj-2t-c   I have this and fits under a S3 33 GTR with no issues. Purchased in 2009 and not one issue. It was $950 back then. Not cheap but something so important isn’t worth cheaping out on.
    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
×
×
  • Create New...