Jump to content
SAU Community

Recommended Posts

Hiya

A friend got fined in bella vista for having foglights. However, the thing is that her car (integra DC2R) does not have foglights but the cop still wrote a fine out.

Is there anything she can do?

Pretty irritating seeing we werent "hooning around" and was driving at the speed limit to a mate's place.

Eric

I bet the dump cop thought the parkies were foglights !

Write to them but it wont do you any good .

Go to court and take any evidence with you that you can prove that the car doesnt come with foggies .

Does it have "driving lights"?  Tell us the whole story.  What was the cop seeing?  They didn't just look at a piece of black plastic and say turn those lights off.

The parkies on some integra models look like foggies and they are fairly bright too .

you caan have driving lights, but only be fined if they are turned on in normal driving.

i got pulled over for an rbt one day in my subaru when i had it and the cop told me to turn them off or he'd book me for them... it had just stopped raining though. i had them on due to heavy rain.

appeal to the fine, see where that gets you. when you get a reply back, go from there.

did you get the cops name and badge?? probs told you to shut up then too.

good luck with it

cheers

Linton

since when have foglights been illegal?

Also note that the SS Commy and XR6T and XR8 highway patrol cars have foglights...standard.

They can only be used if there is poor visibillity in fog or heavy rain , they can even book you if you have them on during the day , so don't use them if there is no fog .

i got pulled over for an rbt one day in my subaru when i had it and the cop told me to turn them off or he'd book me for them... it had just stopped raining though. i had them on due to heavy rain.
You can only have them on when fog is about...

guess wat guys the dumb ass cops did the same thing to me..

just tell her to write a letter to the infringement beaureu telling the story and she will get let off. just say u went to the rta and got them verified to not being fog lights..

In any occupation you do you get some sort of training

so when your are supporting or selling a product you have the product knowledge

How the hell is it that a cop can defect you but he/she/pig does not have the knowledge about the RTA rules and regulations.

If the cops did that to me I would have just gone with the flow, been polite and friendly. Then would take photos of my car, maybe even go to a honda dealer and ask them to verify that it does not have fog lights (for a laugh) and then send in a letter of appeal.

if that fails take it to court.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
×
×
  • Create New...