Jump to content
SAU Community

Recommended Posts

Compiling all the parts I have for sale, both spares and abandoned projects. Located in Sydney, can contact me at : cbaloglow (@) netspace.net.au.

Misc RB26 parts (cam covers, water/oil lines, sumps etc) - PM/email me what you need

Twin high mount exhaust manifolds

Single wastegate with cross over pipe between manifolds. Brand new

$1100

HKS pod filters - $50 each w/adapters

950cc injectors

Low impedance. Have 14 available

$150 each

RB26 gearbox

Both push + pull available, with or without shifter, transfer case etc.

$1200

Cusco 1/1.5 way front LSD

Suit RB26 sump. Used, good condition.

$800

Recaro Raptor interior

Complete set of front seats, rear seat and rails to bolt directly in to an R33. Seats are Recaro Raptor (have air pumps for lumbar support), rear was retrimmed by Recaro in the same material. No stains, tears or marks.

$2800

SR20 exhaust manifolds

Have two, one is one piece stainless runners, the other custom + ceramic coatered. Both place the turbo in the standard spot - internal wastegated.

$350 each

HKS 2530 - SR

Turbo has done less than 200kms. Zero carbon in exhaust housing, no shaft play etc. Can sell with an exhaust manifold + dump pipe

$1700 turbo only

HKS 2835R - internal gate T25 flange

Used, bolt on for SR20

$1500

AP 6 spot calipers

Can machine adapter to suit Skyline.

$2000

HKS 4-way Circuit suspension

Top of the line, remote reservoirs. Fully adjustable - used. Will fit both R33 + R34 GT-R.

$1200

Q45 AFM - $250

HKS DLI

Type I, new in box.

$750

Trust intercooler

Brand new, twin inlet. 600x300x76mm.

$1500

Trust 4 layer intercooler

Used, 600x135x300. Twin inlets, single 100mm outlet

$2000

HKS 280 degree cams + HKS buckets

Used, sell as a set. 10.8mm lift on both in/ex.

$1200

RB26 ARP head stud kit, new- $600

HKS ETC + EDA - R33, used $800

DBA 4000 series GTS-t rear rotors

Brand new in box, part numbers 4908SR and 4908SL.

$400

Adjustable upper arms - rear- R33/34 - $300

Solid rear cradle mounts - $100

HKS 3040 turbo kit RB25

Selling the turbo kit off my GTS-t. Custom ceramic coated low mount manifold, HKS 3040 turbo, exhaust to cat, AFM pipe. Turbo made 294rwkw @ 17psi, no wastegate.

$2,000

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/
Share on other sites

  • Replies 66
  • Created
  • Last Reply

Top Posters In This Topic

Compiling all the parts I have for sale, both spares and abandoned projects. Located in Sydney, can contact me at : cbaloglow (@) netspace.net.au.

Misc RB26 parts (cam covers, water/oil lines, sumps etc) - PM/email me what you need

Twin high mount exhaust manifolds

Single wastegate with cross over pipe between manifolds. Brand new

$1100

Z32 AFMS

$250 each, or $300 each with HKS pod filters + adapters. Have quite a few of the HKS filters - $50 each w/adapters.

C's short shifter

Brand new in box. RB series.

$400

950cc injectors

Low impedance. Have 14 available

$150 each

RB26 gearbox

Both push + pull available, with or without shifter, transfer case etc.

$1200

Cusco 1/1.5 way front LSD

Suit RB26 sump. Used, good condition.

$800

Recaro Raptor interior

Complete set of front seats, rear seat and rails to bolt directly in to an R33. Seats are Recaro Raptor (have air pumps for lumbar support), rear was retrimmed by Recaro in the same material. No stains, tears or marks.

$2800

Trust TD06 kit

Turbo has been reconditioned with a new, larger Garrett compressor wheel and .7 A/R housing, have a choice of 6/8/10cm rear housings. Kit has turbo, manifold and wastegate.

$2700

SR20 exhaust manifolds

Have two, one is one piece stainless runners, the other custom + ceramic coatered. Both place the turbo in the standard spot - internal wastegated.

$350 each

HKS 2530 - SR

Turbo has done less than 200kms. Zero carbon in exhaust housing, no shaft play etc. Can sell with an exhaust manifold + dump pipe

$1700 turbo only

HKS 2835R - internal gate T25 flange

Used, bolt on for SR20

$1500

HKS RB26 low-mount manifolds

Standard tubular replacement manifolds. One piece runners, exceptional welds and construction. Brand new in box.

$1500

AP 6 spot calipers

Can machine adapter to suit Skyline.

$2000

BCNR33 HKS Drag suspension

New in box, fully adjustable with valve rates to suit drag racing

$1500

HKS 4-way Circuit suspension

Top of the line, remote reservoirs. Fully adjustable - used. Will fit both R33 + R34 GT-R.

$1200

Q45 AFM - $250

HKS DLI

Type I, new in box.

$750

Trust intercooler

Brand new, twin inlet. 600x300x76mm.

$1500

Trust 4 layer intercooler

Used, 600x135x300. Twin inlets, single 100mm outlet

$2000

East Bear S2 carbon bonnet - two side vents and the large vent above radiator - http://www.e-aero.jp/aeroparts/skyline/r-33/c-bon.html $1400

East Bear flat carbon bootlid - http://www.e-aero.jp/aeroparts/skyline/r-3...33/c-trank.html $900

East Bear S2 fibreglass front bar/spoiler. Clear indicators, plain style (not the one that has vents on the side) http://www.e-aero.jp/aeroparts/skyline/r-3...-33/f-bump.html $900

S2 headlight assemblies - $650

ABS plastic center grill - http://www.e-aero.jp/aeroparts/skyline/r-3...33/f-grill.html $250

Ganador mirrors R33 2 door- $450

Would prefer to work out a deal on selling the whole lot as a kit.

HKS 280 degree cams + HKS buckets

Used, sell as a set. 10.8mm lift on both in/ex.

$1200

RB26 ARP head stud kit, new- $600

HKS ETC + EDA - R33, used $800

Nismo dash

White faced, 320km/h speedo. Suit R33, used.

$650

OS Giken twin plate clutch

Used, suit push type clutch.  

$1,000

hI I WILL TAKE THE FLAT CARBON BOOLTLID IF YOU WILL SEND TO ADELAIDE FOR ME AND i WILL GIVE YOU $900 CALL ME 0415128693 ASK FOR PETE

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1327782
Share on other sites

HKS 3040 turbo kit RB25

Selling the turbo kit off my GTS-t. Custom ceramic coated low mount manifold, HKS 3040 turbo, exhaust to cat, AFM pipe. Turbo made 294rwkw @ 17psi, no wastegate.

$2,000

RB25 R33 GTS-t Power FC w/Hand controller

Tuned for the above turbo kit

$900

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1328493
Share on other sites

well are you gonna get back to ppl dude i want to buy something from you and you dont want to reply.why did yoyu go on this site to advertise?????? :headspin:

Relax mate. He is a busy man. He continually has good stuff and looks after the SAU guys. Just be patient. I think it is a bit rich you coming on here in Apr '05 and give him a spray without knowing his trader history etc... plus 8 of your 11 posts are related to trading on SAU... Sounds like getting on this site to advertise to me...

DoughBoy; I'll take one of each! free bump! :)

Link to comment
https://www.sau.com.au/forums/topic/72076-big-list-o-parts/#findComment-1335566
Share on other sites

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...