Jump to content
SAU Community

Recommended Posts

Just to let you know its very suitable for an rb20, not too laggy and happy to support up to 300rwhp (on around 1bar?) with a nice phat torque curve. So very suitable for drift too.. its a pretty awsome turbo! Obviously u need supporting mods though

Ill put my hand up to say how good these turbos are... I will also add apart from a few little mods to exhaust and piping this is a fun upgrade... This is a real father/son mod and the results are sure to put a smile on your face...

Dont forget 24psi is easily done by one of these turbos but your motor wont handle it....

I found out the hard way many skylines ago...

But yeah bang for buck this turbo is great. I will also say 1500 bucks is cheap too...

Free Bump

Some were made with t2 flanges so they could be bolted straight onto sr20/ca18 engines and some t3 flanges so they cud go onto rb20/25 engines! If u find one thats been on a sr20 u can get an adapter plate to make it a t3 flange, but i heard some problems plus its easier if its goes straight on...

Sorry Guys for not replying, I have been very busy with work during the V8 supercars this weekend.

I will take it off Monday and email the pics asap.

If you want pics give me your email address, and i will forward them monday night.

Q1 =Internal gate

Q2 =(Power) approx 300rwph (1 Bar)

Q3 =(Drift) I would say so, They are very responsive and wont give up untill redline

Q4 =(Adelaide) Can be posted/shipped, can find out price. I would preffer Perth/WA

Q5 =(Other mods) Maybe the 90 deg bend off the turbo to intercooler piping, I have a genuine HKS 90 deg bend.

Q6 =(Direct Bolt on) Yes, may need to play around with some rubber hoses but thats about it, I will also supply the wastegate actuator. The Dump pipe will bolt up, T3 flange so it will bolt upto the original exhaust manifold

Q7 =(T2/T3 Flange) Most were T2 flange for the SR20 because the SR20 is very common, T3 flange is harder to get, This is a genine HKS T3 flanged GT2530

Micheal, I will email the pics asap.

Colin Thanks for the free Bump.

This is a good opportunity to purchase a great turbo (especialy for RB20) for a good price, I hade to wait 3 months to find one!!!!

This is not just the Garret 2530 but a HKS GT2530!!!

Can call me 0412 475 321 ASHLY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Photo of manifold showing gate location? I mean, it's 6Boost, so we probably shouldn't be worrying, but always wroth knowing what the layout is. Plumbed back to atmosphere? Or into the dump?
    • Yes correct. Also, I'd avoid applying it to soft paint (however I doubt you'll ever have to deal with it in practice). So any paint that hasn't fully hardened, could be a 1k paint that never fully hardened or it could be a 2k paint that was laid down thick and hasn't yet fully hardened. 
    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
×
×
  • Create New...