Jump to content
SAU Community

Garrett Gt30 Turbo Fs

Shaun
 Share

Recommended Posts

Shaun Mentor

Shaun

Posted
Posted

Ive got a near new GT30 for sale. Turbo has done about 3000kms since new. 0.7A/R front, 0.86 A/R rear. Looks brand new. $1700. Its externally wastegated too.

Shaun

0414972596

Price Drop $1500

Link to comment
https://www.sau.com.au/forums/topic/72349-garrett-gt30-turbo-fs/
Share on other sites
Shaun Mentor

Shaun

Posted
  • Author
Posted

I had it low mount on an RB20 manifold. I just had to make up a spacer plate and weld it on the standard manifold because the comp cover was too big. This turbo is brand new! It would suit a new turbo buyer; no play at all, i havent even cleaned it, as it is in the pics is how it came off the car. With the 0.86 rear, i think its rated at 600hp. The 1.02 rear is rated at 700hp.

Man, this turbo is about 8 months old; i seriously doubt its an older style wheel. Its an off the shelf Garrett that has not been modified in any way, **** that T04 shit. Its a Ball Bearing GT series Garrett Turbo.

Ill post anywhere at the buyers expense. If you want anymore info on this turbo feel free to contact me or GCG Turbos in Sydney. The turbo is at GCG where they are trying to sell it for me too.

Shaun

0414972596

Shaun Mentor

Shaun

Posted
  • Author
Posted
Ive got a near new GT30 for sale. Turbo has done about 3000kms since new. 0.7A/R front, 0.86 A/R rear. Looks brand new. $1500. Its externally wastegated too.

Shaun

0414972596

.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Gareth87
      What should I do next to hold the head on

      By Gareth87 · Posted

      I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • TurboTapin
      new 1.5 LSD issues/concerns

      By TurboTapin · Posted

      My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • MBS206
      NC MX5

      By MBS206 · Posted

      Bunnings would have just handed you your money back on that one!
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...