Jump to content
SAU Community

Recommended Posts

Skylines Australia NSW Club first official drag day is coming.

Date : Sunday 31 July. It's closer than you think!

Cost : $220 for non members ($110 now, $110 later.)

Click here for the members thread.

No experience necessary. Just come along and have a go.

Ok then. It's time to get depositing.

The Skylines Australia bank account details are as follows:

Bank - NAB

Branch - Marrickville

Account name - Skylines Australia NSW

BSB - 082 356

Account number - 546 393 766

First deposit is $110 although you can deposit $220 if you like.

Please put your full name in the description. If you are depositing at a branch (how quaint ;)) then make sure you put your name on the deposit form (I know there is a spot for it on there somewhere) and ask the teller to enter it so he/she doesn't forget.

When you have done all this email me at - sarpi at punkass dot com - with your internet banking receipt or date and branch of deposit.

Please include in the email:

Full name -

User name on the forums -

Mobile Number -

Amount paid -

Copy and paste the above to make it easier for me.

Important - You will not be confirmed until a deposit has been made.

Thank you.

So who's keen? What do you all think? Any questions?

  • Replies 214
  • Created
  • Last Reply

Top Posters In This Topic

The day before all of the spots have been taken. We are doing this with the RENEW club and there is a 50 place limit. Basically, it's not like we are going to fill up in a week but I don't think we'll have trouble filling the day.

How much time do you need?

Also, I should mention that I want everyone who is keen to post up what their best time for the day will be to the nearest 100th of a second (eg 10.34). Whoever gets the closest wins a prize. (not telling what is yet cos I haven't decided.)

Unfortunately we can't keep track of the numbers, ourselves and RENEW are both taking spots so we don't know how many are left.

I suggest booking early to make sure you don't miss out

Its a great day for people new to drag as well since you get heaps of runs to practice, not like a street meet where you wait 6 hours for 4 runs

Yes its at WSID, and we have the track all day 9-5. I understand we will also be putting on a BBQ. The clubs are doing a private hire so we can organise it as we like.

One bloke last time did close to 50 passes in 8 hours!

Does someone going want to mark me down as a pitbitch for them? Happy to wear a pushup bra for the day :cheers:

If I knew my car was going to be 100% i'd put my name down to compete but im unsure at this stage.

I guess whatever you can normally take to a street meet.

Pm me if you have any specific vehicle you want included and I'll give you a 100% answer Doughie.

Silver - should be right but it's a bit like asking how long til you get your next root. I don't know exactly but it will probably happen one day.




  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...