Jump to content
SAU Community

Recommended Posts

Hi !

Could anyone tell me what turbo this is.

I bought it as a R34 N1 turbo though not sure if it is or not.

I have done a HEAP of searching and have found that 34 N1 turbos should have :

0.60 front

0.64 rear

9 blade rear wheel

No markings on the front compressor housing

These turbos have:

0.42 front

0.64 rear

9 blade rear wheel

No markings on front housing

Does this turbo look like an R34 N1 ?

There is no plaque

On the rear it has written:

0.64 428-2 TR7093

Any help appreciated !!! :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/
Share on other sites

Ok I will let you know these turbos are R34 N1 turbine because of the following:

1. it has no markings on front compressor while nismo turbos do ie a/r .60

2. it has nine blades at the back while r32 nismo turbs have 12

3. if it spins really, really, really easily than that means its a ball bearing turbo, while r32 nismo turbos are not.

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1343533
Share on other sites

Yeah those three points are valid

BUT

It has a compressor A/R of 0.42 instead of the 0.60 A/r

Apparently all R34 N1 turbos have a compressor A/R of 0.60

The A/R I can see written inside the "tube" part of the compressor housing (sorry not sure of the name of that particular bit of the turbo but where the compressed air goes out of the turbo and off to the intercooler).

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1343625
Share on other sites

OK guys

I ?think? I have similar turbos currently fitted to my R32 GTR (only just)

Part Number is : 14411-AA403 (both turbos did have the plaque)

Which according to Nissan are series 3 R34 N1s – with SS internals and BB rollers. They also have 9 blades

BUT

Mine also have a small separator between the rear turbine wheel and the waste gate (which yours do not seem to have – tho the picture is a little fizzy)

I have only just had them fitted and have not had the chance to fire them up yet, so I can't tell you how they will go. I'm waiting for PCF + EBC to be fitted in a week or so.

I'm also fairly sure they are .42 A/R on the comp side (can't be sure and the pics I have do not show it) and they came off an R34 V-spec II AFAIK

I do have a SQ (silly question) Are Nismo and N1 the SAME thing?

My understanding is that there are N1 turbos and Nismo turbos – and only the Nismo turbos have the .60 compressor housing - but I could be making it all up :cheers:

HtH

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1343650
Share on other sites

Indeed they are the specs of the 34N1s that UAS are selling

A search of the forum will reveal that there are many types of 34N1, and I have now found that they came out in a 0.42 compressor as well as a 0.60 A/R

Pete you got the ones with the 0.60 compressor which are the ones I was after, so I'm selling these and will try and get some with the larger compressor housing. Either that or I'm also working on the possibility of swapping the comp covers over to the larger housing.

EDIT: have found a pair of 0.60 A/R covers so will see if these fit once they arrive. in the meantime have taken off the market. if they dont fit i'll have to put them up for sale again. here's hoping!! :(

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1344187
Share on other sites

yeah no worry ,i lose track of whos who no here sometimes, i have got a another guy down this way chasing the r34n1 aswell

i'm concidering see if there any interest in group buy

as i was talking to turbotec yesterday and

there off the street price is ~$2325ea

if we get a group buy going ~$2000ea

not bad for such a great turbo(the turbos that won targa this year i believe)

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1344473
Share on other sites

Flicking through an old mag and they made mention of N1 turbos and NISMO Group A turbos. Both available through Nissan apparently.

Saying the N1s were same size as standard with better flow capabilities obviously and that the Group A turbos were identified by there larger 0.6 compressor housing. Maybe this is the confusion or group A turbos are something different again?

Link to comment
https://www.sau.com.au/forums/topic/73007-help-r34-n1/#findComment-1344537
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...