Jump to content
SAU Community

Recommended Posts

FS - used HKS cast low mount manifold to suit rb20/25 with T04e turbo . was on my car producing 250rwkw on rb20, sposed to be rated at 500HP. turbo housing is HPC coated and polished . manifold is for external wastegate i was using a hks 42mm but im keeping it, will also provide the braided oil line. I bought the kit for $1800 including the wastegate so fairly cheap i think

$1000

0405 525 787

mike . in sydney

Link to comment
https://www.sau.com.au/forums/topic/73263-fs-rb2025-hks-manifold-and-t04e/
Share on other sites

bnah i wanna sell them together at this stage

when i bought it it was apparently a full hks kit , but it says garrett on the turbo ..

no shaft play , excellent condition

i made 254rwkw on 17 psi in a rb20

so if you got a rb25det i dunno lol ... they are alot stronger so it could take it to 280 - 300rwkw maybe

dunno , depends on your other supporting mods i guess

does it come with gasket set..i can offer 800 delivered

when does it hit full boost? and if i just slap it on my r33 and run low boost will it *** up my engine. i have a powrfc,zaurst,pod,fmic....

how much boost would i run tho wihtout the tune?

here are 2 old pics

one from when i first got it and trial fitted it . so you can see the size its pretty big, this was also before i got it coated and polished etc .

imgp03308tj.jpg

resizeofimg00520av.jpg

it has a AR50 front and a .64 rear i think . Im not 100% sure im pulling ot off the car hopefully tomorrow so ill check it all out . I have only done 2000kms with it on my car , although it has been fitted to the car for over a year it hasnt been driven

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...