Jump to content
SAU Community

Recommended Posts

Long story short, there is burst water main at mill point road that has eroed the freeway and freeway is closed at this point.

Suggest you call transperth as we've just heard that some bus routes are getting through whilst others have been cancelled.

Traffic is litterally parked atm and they are trying to divert onto Mill Point Road... we all know at the best of times its not really a nice intersection... :rant:

suggest taking another way home tonight. :wave:

-miss pie

To all who are unaware, there are major traffic problems that have occurred because of two burst large water mains.* One is on the Kwinana freeway at the intersection of Mill Point Road which is causing major traffic congestion.* The Freeway is closed and will be all night as traffic is diverted into South Perth.* Traffic at last report was banked up past Glendalough Station on the Mitchell.

The other is in William St in the City which is also closed.* The combination of these has created havoc with the transport system as a whole throughout the outer City areas and personnel are advised to consider their best alternative route home.

and

Service Deviation notice: Bus Routes 30, 31 & 34

Message timed at: 2.30pm Friday 13 May 2005

Please be advised that due to a burst water main the Kwinana Freeway has been temporarily closed to general traffic. Bus routes affected by this closure are as follows:

Routes: 30, 31 & 34

UPDATE: these routes are currently being diverted along Canning Hwy and ARE NOT travelling through South Perth.

For those passengers wishing to travel from the city to South Perth please consider the following alternative public transport options:

Bus Routes: 32 & 106

Ferry - departing Barrack St.

and

Service Disruption Notice: William St

Message timed at: 12.45pm Friday 13 May 2005

Due to a burst mains water pipe, Transperth services that travel along or stop in William St in the city may be diverted or delayed. Please refer to the following notices for information relating to specific routes:

ALL SERVICES RUNNING EAST ALONG WELLINGTON STREET (28,81,84,85,91,92,95,220,213 etc):

Running normal route however delays expected.

ALL SERVICES RUNNING WEST ALONG WELLINGTON STREET (28,81,84,85,91,92,95,220,213 etc):

Running normal route however delays expected.

ALL SERVICES DUE TO DEPART THE WELLINGTON STREET BUS STATION HEADING SOUTH (30,31,34,185,78,23,107 etc):

Will operate from WSBS then deviate R Wellington St, L Milligan St, L St Georges Tce, R Mill St into Busport to resume normal route. The William St stop will NOT be serviced until further notice due to burst water main.

ALL INBOUND SERVICES ENTERING THE CITY VIA WILLIAM STREET:

Travel normal route to William & Roe St, then deviate R Roe St, L into Busway into WSBS (set down on A road), then exit WSBS, R Wellington St, L Milligan St, L St Georges Tce, R Mill St into Busport. The Horseshoe Bridge & William St stop outside McDonalds will NOT be serviced until further notice due to burst water main.

RED CAT WESTBOUND:

Continuing normal route along Wellington St, then deviate along Wellington St, L Milligan St, R Hay St. Stops missed include:

Stop 17 Central Park

Stop 18 His Majestys

Eastbound CAT per normal route however massive delays.

BLUE CAT:

The only stop affected is Stop 17 on William Street. Please expect delays.

enjoy ur trip hope u have a good book.

Kwinana Freeway heading south at Mill Point Road is flooded. All

southbound lanes are blocked to traffic.

All northbound lanes open.

We are advising motorists to exit at Great Farmer Freeway or Mill Point

Road.

Restricted access vehicles are not approved to use the Graham Farmer

Freeway.

It would be prudent to divert Restricted access vehicles off the freeway

prior to the flooding at either Hutton Street or Leach Highway.

Traffic is extremely heavy on the approach to the flooded area.

Emergency crews are on site directing traffic.

there is a semi trailer caught in the middle of the flooding, right at

the mill point road exit southbound. It is fully laden with bricks and

stones etc and is sinking into the road due to the waterlogging of the

road surface.

two friggin hours diverting down to freo and then back towards applecross was NOT fun. (and I left before 5pm to try and beat the rush - HA). Good thing I got TV in my car...and all those people who thought i'd never get a chance to watch it...I'll have you know I watched the entire 5pm news on 10, all of the channel 7 news at 6 and still caught a bit of neighbours...

I went thru that water at around @1pm today and was only crawling thru traffic for like 4mins.Everybody was going single lane style closest to the wall.Funny to see but not for the peeps houses.

there was also a bit of a pileup near UWA, intersection of Winthrop ave and Stirling hwy... i had to detour and take a scenic route thru Kings park just to get thru to Subiaco. I came out on the other side of Rokeby rd and cars were piled up to there. So that means the line on Winthop went from Stirling hwy up past Sir Charlies and past Rokeby rd. that was awful.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
    • Any going to watch World Time Attack at SMSP this year?
    • Appreciate the correction on the "ground", that will make a huge difference to looking at this. That makes complete sense about AF70/AF71 which is what I had come down to being the issue, one of these. I'll have another look in the ignition wiring when I get a chance next week. I'll also make up a jumper wire for running that AF73 test.  ECU is fine, relay itself is fine, pump harness is fine and the pump itself is fine. I am going to upgrade the Walbro 255 anyway with a DW300 I have since I need to replace the fuel sender and I'm going to upgrade the FPR with my chasebays kit ready for new plenum/injectors/dbw, but I'll get this working first. That's why this is so frustrating. 
×
×
  • Create New...