Jump to content
SAU Community

Recommended Posts

if you decide to part pm me... would be intersted in sunroof controller, car jack, spare tyre bolt and maybe drivers seat... but definitely the other parts... wat area of syd are you in?

and allblitz he would easily be able to part it for more than 5k

razorsharp - i'll let you know if i sell for parts...

and yes i would be expecting alot more than $5k for this...

eels- nah its just the door, rear quater, passenger seat, and roof needs to be hit and straightend, the door and rear quarter can be bought and welded on... the roof is the only hard part... any way banel beater is cummin tomorow so we'll see if its worth fixing or not... watta ***n waste for something i bought 3 days ago..

Sorryto hear, but did this happen on Castle Hill rd last night? I was driving towards home in castle hill and saw a white 33 gtst that had been T Boned right in the passengers side. I drove through right as the first tow truck arrived. Sorry to see this happen :D Hope everyone was ok..

Buddy, my hit was way smaller than that (happened at a race track) and it is costing me $6-7K to fix up properly. That is an absolute right-off, sorry to say :).

All the best and hope you're ok!

$5K is a bit low, sell it for somewhere in btw 5K and 10K, i reckon.

i was turning right, i have to give way yes. BUT he had no head lights on and came flying down didnt even slam breaks... cops ****ed me becoz gotta i give way, even though he had no head lights, its going to court... my word vs his..

who u think the cops are going to be in favour for, and old bloke in a family car or a p plater in a skyline ? !!

yeh if i have to sell for parts i want more towards the $10k mark for the whole car...

I had orderd a new haltech computer setup, and a hybrid front mount on the weekand to be put in this week aswell.. looks like that iznt going nowehere...

I'll post up as soon i know if im seperating for parts or not.

***n shame i loved that car too....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
×
×
  • Create New...