Jump to content
SAU Community

Recommended Posts

Last time at Eastern creek I was only able to run 0.8 bar due to fuel pump issues and I would estimate, based as dyno figures seen quite soon afterwards, that I had, as a peak power figure, around 220rwkw.

Apart from the R34 GTR's I overtook around the track due to skill, balls and semi slicks, one particular incident comes to mind.

I've come onto the straight about 2 car lengths behind and at equal speed as an R34 GTR that had been tuned by CRD the day before and had, I think it was 253awkw, could have been rwkw.

Now what I want to know is; how come I was able to catch him down the straight? (not saying it was easy)

I have no reason to believe he was holding back at all.

His car mainly stock, pfc, zorst and boost.

Me, GCG highflow turbo, the normal bits.

Link to comment
https://www.sau.com.au/forums/topic/73903-tickle-me-this/
Share on other sites

Semis, the great equaliser:thumbsup:

The NEO engine is a good equaliser as well, especially if you have the usual bolt ons it would mumbo pretty well. Still good effort and im guessing you would have been entering the straight a 130km/h whilst he was in the ball park of 120km/h???? And you would have been able to brake as deep if not deeper for turn 1

Link to comment
https://www.sau.com.au/forums/topic/73903-tickle-me-this/#findComment-1359538
Share on other sites

Um, guys dont forget he's carrying a little less ballast in the GT-t compared to the GTR. I was going to say power was similar, but a re-read showed that i was dyslexic for a bit, thinking the GTR has 235 not 253 :cheers:

Um, aerodynamics? Gearing? You're just cooler? Loads of possibilties :)

Link to comment
https://www.sau.com.au/forums/topic/73903-tickle-me-this/#findComment-1359551
Share on other sites

Nope, everyone knows GTTs are just faster then GTRs in NSW :P

My guess is the power was similar but your faster speed onto the straight paid off...its very hard to make up for speed you lose at the entry to a straight ;)

Link to comment
https://www.sau.com.au/forums/topic/73903-tickle-me-this/#findComment-1359834
Share on other sites

Semis, the great equaliser:thumbsup:

The NEO engine is a good equaliser as well, especially if you have the usual bolt ons it would mumbo pretty well. Still good effort and im guessing you would have been entering the straight a 130km/h whilst he was in the ball park of 120km/h???? And you would have been able to brake as deep if not deeper for turn 1

I guess I could have come onto the straight 10kmh faster. I wasn't really referring to braking but yes, I braked later.

I wish I had 4 gears under 1 to 1 ratio instead of 2.

Ben - GTR badge???

Perhaps my car is lighter. What does an R34 GTR weigh. Maybe he left his spare and stuff in the boot but I didn't.

Link to comment
https://www.sau.com.au/forums/topic/73903-tickle-me-this/#findComment-1360813
Share on other sites

Maybe, but i doubt that woudl be it unless he is shifting like a grandma. The std turbos would be responsive enough to grab a whole lung full of boost as soon as he jumped back on the loud pedal...especially when you factor in the auto slipping into the next gear and as you touch on less range of ratios.

Perhaps the GTR owner was very much aware that he was driving an 70k car at the track and was driving it with the level of respect it deserves...or perhaps if you take the badge off the GTR is just another car whose performance down the straight is hp/weight:)

Link to comment
https://www.sau.com.au/forums/topic/73903-tickle-me-this/#findComment-1361661
Share on other sites

I think, it's all about power to weight issue plus You have aftermarket turbo Abo Bob.

It's not surprising for me for a gtt with aftermarket turbo to overtake gtr.

Plus, as far as I know at high speed, gtst with aftermarket turbo can keep up with gtr.

But I might be wrong, I just want to add my opinion.

Another thing, probably you are crazier when it comes down to cornering and the GTR driver scared of you and back off (HAHAHAHA)

:) j/k

Link to comment
https://www.sau.com.au/forums/topic/73903-tickle-me-this/#findComment-1364883
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Welcome to Skyline ownership. Yes, it is entirely possible parts websites get things wrong. There's a whole world of inaccuracies out there when it comes to R34 stuff (and probably 33 and 32). Lots of things that are 'just bolt on, entirely interchangable' aren't. Even between S1 and S2 R34's. Yes they have a GTT item supposedly being 296mm. This is incorrect. I would call whoever you got them from and return them and let them know the GTT actually uses 310mm rotors. Depending on where you got them from your experience and success will obviously vary.
    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
×
×
  • Create New...