Jump to content
SAU Community

Recommended Posts

I have 235/40 17" for front and 255/45 17" for rears.

I have a stock space saver wheel in the boot. Now I was wondering If ever I do have a flat tyre, and I use the spacer saver will it work?

I mean the current tyres are 17" and spacer saver is 16" and its very very thin..

So do I need it?

Link to comment
https://www.sau.com.au/forums/topic/74185-space-saver-wheel/
Share on other sites

I have 235/40 17" for front and 255/45 17" for rears.

I have a stock space saver wheel in the boot. Now I was wondering If ever I do have a flat tyre, and I use the spacer saver will it work?

I mean the current tyres are 17" and spacer saver is 16" and its very very thin..

So do I need it?

Width is irrelevant, it is diameter that is important so the diff (and ATTESSA in 4wd's) doesn't overheat due to the rotational speed difference. A 225/50/16 is effectively the same diameters as a 205/60/15, and a 225/45/17, and a 245/40/17, and a 245/35/18, and a 235/30/19 etc

I am hoping that you have 235/45/17 on the front and 255/40/17 on the rear, otherwise you already have a diameter difference that will make it hard to carry one spare that suites both. Not an issue on the front of a 2wd, but certainly an issue all round on a 4wd and on the rear of a 2wd.

Hope that helps:cheers:

Yea I got them mixed up, 235/45/17 on the front and 255/40/17 on the rear.

Not sure what the stock spare tyre is. (Will check later).

But im completating will the spare wheel come in handly? (since the wheels are quite large compared to the space saver) or ill just remove it and put some subs/amps.

Don't believe it's legal, not to carry a spare. I'm not absolutely sure of that, check with RTA ['phone call'.] Even on the rear, it will be OK if you use care to drive s l o w l y, and a minimum distance. If necessary, stop for a bit ,say. every 1/2 to3/4 Kl. Better this than stuck completely in some place and in a Mobile dead spot. Will definately be OK if you use common sense. The diff does no more than it does when cornering, and on a track,the diff works a great deal of the time.

Don't believe it's legal, not to carry a spare. I'm not absolutely sure of that, check with RTA ['phone call'.]  Even on the rear, it will be OK if you use care to drive s l o w l y, and a minimum distance.  If necessary, stop for a bit ,say. every 1/2 to3/4 Kl.   Better this than stuck completely in some place and in a Mobile dead spot.  Will definately be OK if you use common sense.  The diff does no more than it does when cornering, and on a track,the diff works a great deal of the time.

New BMW's don't have a spare, so it's certainly not illegal.:cheers:

hmm cool, means i can take out the spare and maybe get that welding? what is that stuff mmmgtir?

all i can say is if u have this stuff make sure that if it leaks its not going to be able to leak on anything. heat, time, and some loose heavy objects in the boot of my old car managed to make a bit of a mess.

why do you want to take the spare off for? not like you need the extra boot space.

You can put it on any side of the car you want. If its the difference between driving home at ~80kph with a slight lean to one of the corners, as opposed to paying for a flatbed to tow you home. Just leave it where it is and be glad you have a spare and use it when you get a flat. Not like it weighs that much anyway.

just out of curiosity, does anyone spare fot over their front brakes ?????

cause i ain't too keen on having a front flat then having to pull a tyre off the back and put onto the front then put the space saver on the back seems like a lot fo messing around, would a spacer solve my problem ???

People are asking silly questions.

The space-saver is designed for your car. Its designed to fit on front or the back of the car, and on either the left or the right. Yes it clears the calipers, and the rolling diameter of the wheel is unaffected, if you DO have larger back tyres with a larger diameter, its not like you will be driving down the road with one of the wheels not touching the ground because of difference in wheel sizes.

I have used the space saver on my car many times already, front and back, left and right.

For the record,

After completely shredding a 265/35/18 rear ( on my GTSt ) I travelled about 250kms from just north of Nelsons Bay to Sydney on the spacesaver. After being advised not to go above 80km/hr by the local tyre mob ( who couldnt find me a suitable replacement ) I gave the spacesaver about 36psi and headed off at a brisk 100-110km/hr down the freeway. I stopped every hour to check the condition of the tyre and ensure the pressure was holding, but it never missed a beat and got me home in a damn decent time. And honestly, I think the tyre looks better for the run. No issues with treadwear, car handled fine at the higher speeds, and I now have complete confidence that it is more than up to the job.

In short, dont underestimate the quality of the spacesaver, as said above, its designed to be used on your car ( it does look a little rediculous from behind but you get over that when you start overtaking slower cars ).

Z.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
    • For race cars, this is one part where I find having the roll cage bar having gone through a hole in the floor better than the build it up on a ledge inside... The Merc I help on, the main hoop ends are marked on the car, and the jack is marked... Jack goes under a few inches and lifts one whole side of the car up... Removes that fight for long slim jacks for race car duties!   My biggest issue for the daily drivers I work on, is my jacks don't go high enough. The jacks start out on a few blocks, jack it up, then start a second jack under it on more blocks, and then I can get an axle stand under it. My axle stands are presently in use, and are nearly fully extended. The car is sitting with barely more than a cm of clearance to get the wheel off the studs! Sarah's Kluger is the same, as it has an ungodly amount of droop available in the suspension and a distinct lack of good jacking points!
    • Happy? Yep, my to do list is getting shorter and shorter. Either this light approaching is the end of the tunnel, or I'm about to be hit by a train... Ha ha ha   Also, Duncan isn't that far out of town that you need to make a multi day drive out of it. 😛
×
×
  • Create New...