Jump to content
SAU Community

intercooler for r32

lucas
 Share

Recommended Posts

J_R32 Experienced

J_R32

Posted
Posted

hi just wandering (since it is pick up only)if you need to trim the front bar to make this intercooler fit, and how much boost were you running with this intercooler? (presume it is off 7m gte supra?)

thankyou

200zRRR Enthusiast

200zRRR

Posted
Posted

Thats one nice price, I payed $130 for one of these coolers alone 12 months back. Fits in nice on my 200ZR, very similar piping to the 32 (has an RB20Det) and I am impressed with its effectiveness. Running 2" piping with it spools up noice with little lag. They do impede flow a little though so if your wanting more than about 250Hp of air through it you would be pushing it a little.

Guest
This topic is now closed to further replies.
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Most women will agree that parking is the most taxing part of driving

      By soviet_merlin · Posted

      I'd be worried about having to parallel park a boat like that. Magnificent car though.
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • MBS206
      new 1.5 LSD issues/concerns

      By MBS206 · Posted

      Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
×
×
  • Create New...