Jump to content
SAU Community

Recommended Posts

what about Evos that come with fmic standard ????

cause more injuries ???? what about the massive bullbars hanging off 4WDs ????

im pretty sure they would do A LOT more damage then a fmic will in the event of an accident.....but oh well what can we do hey ??

good luck getting them cleared...

Next time give em a run 4 ur money we need more police chases.I have escaped twice. Floor it & turn corners!

That has got to be one of the most stupid posts I've ever read.

Do us all a favour and sell your Skyline before you kill someone.

Seriously...it's people like you who give the rest of us a bad name.

Are all BOV illegal ? i didnt know they were illegal

Venting to atmosphere BOV's are considered illegal because of the increased noise they make. Thats what the RTA inspector said. However if you have a plumback BOV these are theoretically not illegal because they are not noisy. So no not all BOV's are illegal.

Same goes for pod filters, these are deemed illegal also because of the increase noise they make from induction roar.

Front mount intercoolers, well thats just bull, unless they protrude outwards from the front bar, so if they are sticking out past the front bar they would be deemed illegal. Just like rocket launcher rod holders or extra lights on a 4wd bullbar cannot now stick out past the bullbar.

Fog lights on during daylight hours is a gay rule. How many cars do you know of like Volvo's have lights on, from the factory during the day as this is deemed safer so why these are illegal I don't know other than to raise more revenue.

My advice would be to cop it sweet from the cops then debate the issue later, even go to an engineer to get your mods approved and keep the engineer report in the car, then stick it in the cops face "without" saying anymore.

Ride height is a min of 100mm. Its must be able to pass over a 100mm object from front to rear under the car otherwise its deemed illegal so yes you have to be able to drive your car over that object without touching.

Hope this helps

Cheers

Front mount intercoolers, well thats just bull, unless they protrude outwards from the front bar, so if they are sticking out past the front bar they would be deemed illegal. Just like rocket launcher rod holders or extra lights on a 4wd bullbar cannot now stick out past the bullbar.

ok.. just saw R2HKS' post! oops!

about the fmic.. i was defect for mine.. the reasons are for what R2HKS has said, plus because it can change your emissions levels.... i was told to pass an emissions test to keep fmic....

what happen to freedom of speech if u wannna lay down n die then do so ,me im gonna fly .Old tmer can u remember y u bought a skyline?

Good thing there is no protection for free speech in Australia (except parliamentary privledge, but I'm guessing that probably doesn't apply to you).

LW.

There is no freedom of speech on this board. And many others. If the mods don'y like what you said they'll delete it. I am surprised Nick hasn't yet.

Yeah I'm starting to realise this now. I'm new here this is only the second thread I have posted in and the 1st thread I posted in Bel Performance vs Croydon's Racing Development in the NSW forum has now been deleted. That's just weak, apol's for the

Cheers

comon guys give the guy a break...if you dont live in sydney west(near liverpool or fairfield area) you wont know....there is cops everywhere they are now out in force and r defecting anything and everthing that they dont like anything that is not standard even tho the mod is to rta standard you will need engineer certi.......i know this have happen ever since..some other f**ker car ass f***....... it up for all of us...now the cop are upset and are on to everyone else...

i also got defect for non standard FMI, non standard exhaust, non standard pod filter...even tho i have my pod filter box up, my exhaust is very soft.. since then i got my car engineer and my axhaust turn out to be only 77db!!!!!!!!!..i was been nice and respectfull to the officer during the time of defect........

well last friday i drive from fairfield to liverpool KK in my camry....i saw 8 cop cars in less then 15 mins!!!...dam...... so everyone just take care... pls try to avoid the area the on friday, sat nite..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
×
×
  • Create New...