Jump to content
SAU Community

Recommended Posts

  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Saw one the other day... didn't have much of a chance to run it either because of the traffic unfortunately. Another day.

It will be a while before they do get modded 'cause yeah, most people wouldn't want to lose their warranty. The dillema of owning a brand new car..

  • 2 weeks later...
Originally posted by GTS-t VSPEC

Guys,

They wound the boost down on the turbo to prevent the power exceeding the XR8. They did this because otherwise no-one would buy the V8.

which is exactly why they governed the supercharged holden....

I had heard that there are quite a few Fords going back due to gearbox problems, not necessarily the turbo ones, but one doesn't trust the Australian manufacturers to over-engineer parts like the Japs. An RB25DET box is good for about 500hp, I don't know if we'll be able to say the same thing about the Fords.

While then engine may have heaps more power available it will be interesting to see how the drivetrain holds up to the task.

See'ya:burnout:

There has been radical changes with this car so I would be waiting for the 2nd series before I bought one, to make sure they get all the bugs out as you find with Holden & Ford the first of a new model has a few problems and they are generaly fixed in the second series.

rumour has it that there is a blue xr6 turbo in the ,taylors,keilor area ,that is wild.Huge fmic exhaust ,b.o.v.(id say ecu but not sure) droped with 19's .its been seen by a few ppl but i hav only saw it launchin from the lights and there was to much smoke to see it proply!I think there the best thing ford did ,And should take alot of interest and sales away from HSV

HSV's are soo dull looking..

For today for instance... there was a VT HSV across from me a few lanes and as i pulled off the kids at the side of the road were pointing to my car - they couldn't give two shits about the HSV. It was funny.

R34's are 1410kg, for the GT-T, but yeah, Ronin's figures are correct for the GTR.

What i'm interested in is how a 1410kg 206kw R34 GT-T would go against a 1750kg 240kw XR6-T....how'd u guys reckon that contest would end up?

Anyone lucky enough to have driven both? Any comments/thoughts on handling, braking, acceleration, etc, i for one, would find most interesting... :uh-huh:

cheers.

Originally posted by 2rismo

LOTS!

DOHC, 4.0l 6-pack with a restricted and underloaded turbo and motor...

BIG things will be made from this platform!!

A mate just received his after a delay with the sunroof and a crack in the windscreen which was replaced before delivery.

Click here to see the professional shots he had taken the other night.

AWESOME!

hey 2rismo, you know kula too huh?

He's coming this sunday on the dawn run :D

There was a manual at willowbank pulling meh times. MRE beat it twice. I think he has exhaust and maybe boost....in an auto R33 GTST.

1750 is pathetic. Cars are getting heavier instead of staying the same weight or getting lighter.

I think they are a top car, but so far its all a bit ho-hum.

I was spewing my car didn't beat it... finally got to line it up and buggered the start to the tune of a 3.5 sec 60ft :burnout: It's all Gary's fault :P

Nearly caught the Falc though, despite the horrendous launch. Still a VERY nice car and certainly one to be wary of if you see it on the street. Damn they look horn in that blue...

Originally posted by inark

which is exactly why they governed the supercharged holden....

I assume you mean the old 5 litre V8 not the Gen 3? The Supercharged V6 would not even come close to the Gen 3 under ANY circumstances. Exhaust and remapped computer gets 220-230 RWKW on a stock 225kw flywheel Gen 3 V8.

The Xr6 Turbo looks like the weapon of choice these days. Lots of interest but it would have been better if Ford put a stronger gearbox like the new XR8 is going to get. The computer will also need to be cracked the same way as the Gen 3 V8 ECU before any decent results are achieved. I hope it dosent take the 3 years it took for LS1 edit to come out!

My understanding is that without adding a supercharger the new DOHC Ford V8 does not have alot of aftermarket potential so all the focus will probably be on the XR6 Turbo and some great results should be achieved!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
×
×
  • Create New...