Jump to content
SAU Community

Recommended Posts

I have been defected for a pod and was told to remove it but i have nothing to replace it with. I can't seem to locate a stock airbox anywhere an Sydney and can't exactly drive around with no filter at all. But i have read somewhere that at least one air intake mod is allowed....so does that mean i could leave the pod on? I have also bought a UAS airbox to cover it but i assume that covering it won't pass the defect as the pod is still there...

advice is urgently required..thanks

Link to comment
https://www.sau.com.au/forums/topic/75170-number-of-air-intake-mods-allowed/
Share on other sites

As far as I understand, a pod is legal if you have it boxed.

Something to do with the pod taking in air from engine makes it illegal, or something along those lines.

Mybe somebody can correct me if I'm wrong.

Depends who you call. I've had an engineer call the RTA directly and ask them if my pods were enclosed, was it legal, and the RTA dude said no. Any changes to the intake system can increase/decrease airflow into the engine and thus effect the emissions output of the car.

Said engineer signed off my car with a clean bill anyway because he liked it :rofl:

(this was for the normal yearly pink slip for registration renewal, not a defect)

i was told to remove mine because of noise polution! lol!!! so yeah... i had the option to enclose it, but it had to be in a plastic box... ie: something that wouldn't increase the sound!! He was happy with me getting the pod enclosed, so i don't see why you couldn't just do that!

I was told by the RTA that they are illegal if you don't have them engineered and the engineer is not allowed to certify an un-boxed pod

????

well technically that's correct. It's wise to get your modifications engineered, it saves a lot of hassle with the Police.

You can have an unboxed pod engineered legally if it was complied that way when it came from Japan. I believe that's correct but take that with a grain of salt. If in doubt just box it (as it's more beneficial) or run the stock airbox with an aftermarket panel filter which flows better than the repco replacements (although mine's perfectly fine)...

Yeah i just decided to go with the stock airbox and really cant notice the difference. Its a bit slower off the mark but only by a fraction. My pod was leaking shit all over my engine bay anyway which was causing my car to idle really rough and stall at low rpm. Got the wires replaced and the car tuned and its running smoother than ever. Definately don't feel the Pod is that much better that its worth copping a defect over. Just gonna put a K&N panel filter or something inside the box to get a bit more air and i should be right

  • 5 months later...

UAS make pod boxes for gtst r33.. fmic and stock.. ya can get a plastic one for around 100, fiberglass for around 200, or carbon fiber for 300. the fiberglass and carbonfiber ones are custom fit, but the plastic one is like one size fits all style.... which doesnt always fit snug..

www.uniqueautosports.com.au

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...