Jump to content
SAU Community

Recommended Posts

Due to the amount of interest in these front pipes on the forum i thought i would organise a group buy.

For this to go ahead we need the following:

Minimum 5 sets

50% deposit prior to order (other 50% paid when goods are picked up)

The price for these will be $1,100 delivered to Sydney all taxes/shipping etc included. For people outside the Sydney area that cannot pickup the only additional charge will be shipping from Sydney to you.

Please bear in mind that while internet companies may quote a cheaper price for these once you include shipping costs and taxes they are condsiderably more expensive to the tune of $1,400 to $1,500 by the time they are here.

I will leave this open for people until the end of this month (June) for people to express interest, if there is not 5 people willing to pay a deposit on 30 June the buy will not go ahead.

This group buy has been made possible buy Advan Performance so you are buying from a reputable company in Australia that will provide receipts.

Here is a pic of the front pipes but please note this is only half the front the pipes.... the rear piece is not pictured in this pic. If someone wants pics of the complete pipes post here and i will get some.

http://i7.photobucket.com/albums/y257/ido0...9s/55927fba.jpg

1. paulR32gtr

2. Lucien

3.

4.

5.

Link to comment
https://www.sau.com.au/forums/topic/75829-trust-split-dumpfront-pipes-for-gtr/
Share on other sites

Andrea, Richard here. we have met a couple of times at WSID and weekend before last at Advan (I drive a gunmetal 32GTR).

hmm, that really is a good price for those delivered, considering how much they are even when buying from a backyard net business

ATM I am just tossing up between going Big Single, or sticking with low mount twins. If I decide to stick with twins I think I may get these to keep me happy in the mean time. Would it be too much trouble to get a fitting price from Advan for us?

Thanks,

Richard

Hi Richard :D

I have tried to get the best possible price for them and i think i have. Better than any internet backyard company i have found.

I am in the same situation as you deciding if i should stick with twins or go for the single, it's a tough choice :confused: I really love these pipes and if i get a set i think i will cry if i ever scrape them on a speed hump.

I will get an price estimate on fitment for everyone as a guide. Because the turbos have to come off there will be a few hours involved.

yeah, it is a very nice price.

That would be great on fitting estimate :D

They certainly are the nicest looking GTR dumps/fronts I've ever seen.

Cheers,

Richard

I have had requests for details of what you get so here is a pic of the complete system, nothing else is required.

extention_fpipe.JPG

Remember only 50% ($550) is required in a months time and the rest after the goods arrive which would be approx 3-4 weeks after order is placed so it's the perfect way to spend your tax refund cheque :O

:wavey:

:)

I was just wondering if you had any word yet on a fitting estimate? Doesn't have to be a firm price for us to beat them about the head with, just an estimate would be fine :D

Thanks.

Ok, Due to the fact that the turbos have to come off to fit dump pipes on a GTR there is quite a bit of labour involved unfortunatly as well as costs of coolant etc due to the turbos coming off. So, you would be looking at a cost of approx $700 fitment including coolant etc. I have no idea how that compares to other shops though.

that seem reasonably fair if the turbos have to be removed. If that's the case it would definately be at least a whole days labour.

I will consider what to do... perhaps it may be worthwhile to spend another few K and get turbos at the same time...

Thanks for chasing that up. I'll have a think and let you know before the deadline.

While your doing to turbos, its probably worth doing the manifolds ... :)

Its a shit of a job to change the dump pipes, but its quite possible for the home mechanic over a few days if you feel like saving the cash.

LW.

Will these bolt onto the standard R32 GTR turbos ? How about the cat at the other end? If so put me down for a set - should be in perfect time for my next trip out to Racepace.

Andrea, you certainly are tempting me. I have been thinking about going to big single route, purely because I love the sound of an external wastegate. but my head tells me i'll be better off with a set of 2530s or similar.

I will get back to you before your deadline.

thanks.

No problem Richard, If yourself an lwells decide to purchase then we only need one more for it to go ahead, no pressure or anything lol :jk:

I too love the sound of an external gate but the power that can be made from smallish twins with the right setup is hard to look past, the legalities of the screamer is what worries me.

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...