Jump to content
SAU Community

Recommended Posts

  • Replies 105
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

BLK r33 gtst, the std snorkel doesnt fit as my box sits lower than the std box... but there are plenty of gaps in around the headlight where the air comes in.... especially at speed...

pms replied to.

cheers

Linton

Pity he just can't keep up with the demand though ;)

If he didn't live the way out in the sticks at least I could be helping him :)

Installed mine last week.

Looks awesome, and going from a stock box, to this and a pod is interesting to say the least.

Now I just gotta fix that stupid misfire....grrrrr

it is hard to keep making them... things at work have gotten super crazy now and its just tiring me out, both mentally and physically...

im doing myy best though.

cheers

Linton

  • 3 weeks later...
  • 2 weeks later...
  • 2 weeks later...
I would like to order one too :P

Anyone have any troubles with the boxes and FMIC piping?

I have one of these boxes and fits with no problems at all. Depends on the intercooler piping mine goes throught the right wheel arc and behind the radiator.

hey guys

i havent made any for a while, ive had sooo many hassles with my car lately that i havent been able to or wanted to... now ive got defected and i have to do heaps of running around to clear it..

they didnt defect the box though, even though it was the first dodgy template i did.. not the good one i usually have.

when i get all this cleared up and have nothing to worry about on the car or even better if ii sell it, ill be back into making them,

they fit no worries with standard or fmic plumbing...as it will either go back to the standard pipes, or go over the radiator... it just means an extra hole or not.

cheers

Linton

  • 1 month later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...