Jump to content
SAU Community

Recommended Posts

I've had this weird smell from my 34 more or less since I got it a month or so ago - i've noticed it a bit more lately. It has had new exhaust (3" system), clutch (heavy duty single plate) and brakes (new standard nissan pads) but the smell doesn't seem like any of those.

It does it after a bit of driving - not necesarily giving it stick, and you notice it mostly when stopped at lights. The best way to describe the smell is like 'gunpowder', or if you've ever seen those balls you can get that crackle when you hit them togethor the smell is just like that. The car has been at several mechanics with various work carried out since i've noticed the smell and they haven't found it either. Its not that bad but it certainly shouldn't be there. I was wondering if anyone may have experienced anything like this.

Its definitely not the smell of brakes or clutch btw - bear in mind i value cars for a living and have never experienced this smell before..

Any help would be really appreciated,

Paul.

Link to comment
https://www.sau.com.au/forums/topic/75957-strange-smell-from-r34-gtt/
Share on other sites

Yep that's the new exhaust smell, we had a daewoo that used to make that smell when you gave it a bit, the smell eventually starts to dissapear.

BTW drive past your place a fair bit, got some nice 34's there, especially the red one!!!

Its definitely not the 'new exhaust smell' - I know exactly what you mean, that only lasted maybe 50kms from when I got the zorst done. I didn't think anyone would know, just thought there may have been a chance.; its a really unusual smell...maybe its me :whatsthat

If it does sound familiar to anyone let me know your thoughts. If I find out what it is i'll let you know.

Btw im pretty sure its not the cat as well.

I might take it to the exhaust shop to get them to check for leaks in the system, although usually you'd hear that..

Dan - yer we've got plenty, not selling as many as we anticipated, I think all the 34 buyers are on holiday....

  • 3 weeks later...

I changed the dump pipe and CAT on my 33 a few weeks back and noticed this same smell. Initially I thoughti t might be an exhaust leak, but after investigation it appears to be just 'new exhaust smell' as well. It has gotten less noticable as it wears in but I still get a whiff after giving it some boot. It's probably stuck around longer as the dump pipe is thermal wraped and painted with heat proof paint.

  • 5 months later...

Motorman, I have the exact same problem as you.

Cant reproduce it and it happens only every now and then.

I noticed that after I changed my engine and gearbox oil the smell did go away.

I cant remember the last time I experienced that smell. But every once in a blue moon it does come up.

Did you manage to pinpoint what the problem is?

The japs could have installed a gearbox "breather" or similar.

What mine was... a small tube from the gearbox, dunno where it was connected too, that ended in the engine bay like a breather.

The smell would then come back into the cabin. weird smell that was.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • To expand on this to help understanding... The bigger/longer the block is, the more it's going to work to sit on your far away high areas, and not touch the low stuff in the middle. When you throw the guide coat, and give it a quick go with a big block, guide coat will disappear in the high spots. If those high spots are in the correct position where the panel should be, stop sanding, and fill the low spots. However, using a small block, you "fall off" one of the high spots, and now your sanding the "side of the hill". Your little block would have been great for the stone chips, where you only use a very small amount of filler, so you're sanding and area let's say the size of a 5/10cent piece, with something that is 75*150. For the big panel, go bigger!   And now I'll go back to my "body work sucks, it takes too much patience, and I don't have it" PS, I thought your picture with coloured circles was an ultra sound... That's after my brain thought you were trying to make a dick and balls drawing...
    • Oh I probably didn't speak enough about the small sanding block for blocking large areas.  In the video about 3 minutes in, he talks about creating valleys in the panel. This is the issue with using a small sanding block for a large area, it's way too easy to create the valleys he is talking about. With a large block its much easier to create a nice flat surface.  Hard to explain but in practice you'll notice the difference straight away using the large block. 
    • Yep I guessed as much. You'll find life much easier with a large block something like this -  https://wholesalepaint.com.au/products/dura-block-long-hook-loop-sanding-block-100-eva-rubber-af4437 This is a good demo video of something like this in use -    You have turned your small rock chip holes into large low spots. You'll need to fill and block these low spots.  It's always a little hard not seeing it in person, but yes I would go ahead and lay filler over the whole area. Have a good look at the video I linked, it's a very good example of all the things you're doing. They went to bare metal, they are using guide coat, they are doing a skim coat with the filler and blocking it back. If what you're doing doesn't look like what they are doing, that's a big hint for you  
    • The odometer does go up when driving.  Does this tell it is an issue with the speedometer itself?    Where can I look for replacement cluster? Or speedo? I can likely do the repair.. Will ER34 cluster work on HR34? Or do I need a HR34 20GT S2 specifically lol   
    • Mine's a bit bigger at 70x150mm roughly. The spots are flat, just can feel the edges if I dig my nail into it. I did fix some other other ones by both using my finger to sand that small spot (I'm a bit wary of doing this and creating hot spots and a bigger mess) and I also did sand over it flat and others, but this also worried me a bit because if I create an overall low spot on the panel on paint that is good.  Correct me if I'm wrong but as long as it's flat even if I can feel the edges, I can put filler because it will all be level once I sand it? I can see myself going in a circle after sanding guidecoat with 320 grit if for example the panel is flat with my hand but because I sanded the guidecoat I could have created a low spot again somewhere. Unless where I'm going wrong is what I mentioned previously where I didn't go low enough on the grits. It's 1 step forward and 2 step backwards here haha. I'll probably need to experiment with it more. Last time I go back to bare metal lol.
×
×
  • Create New...