Jump to content
SAU Community

Recommended Posts

ADR69 (full frontal impact occupancy protection) does not apply to any vehicle prior to 1995, however, all aftermarket panels must also be certified and have passed crash testing.

So basically no, the bonnets are not legal unless they have undergone crash testing and have been certified by QT.

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hey all this is my 1st post. ah was going to say the same thing as above. The people who imported my car said something along the lines of if its befor 1995 than it can be legal but has to be certified anything over 1995 than apparently not at all.

  • 5 weeks later...

At the MSC I was showing the couple in the burgundy R33 my FMIC isnstall and a guy from TTR (??) racing said that he could clear my bonnet of a defect becuse it is a fibreglass bonnet with a carbon covering, anyone gotten off a defect like this?

let me firstly say hello to everyone i'm new to this site I've just purchased my first skyline I imported a 96 R33 GTR Vspec through SVi they made the process so easy for me and i would recomend them to everyone i'll post some pics up for everyone after i get them. I work at Custom Carbon and let me say that this is a huge grey area at the moment and it really comes down to the individual officer,we are still having tensile and compression test on a few of our bonnets for the ADR approval. The funniest thing is still to come thanks to project A380 there is now a world shortage of 3k carbon so with this in mind we are experimenting with a new carbon twill,cant give too much away but i hope to have a few products on show on my GTR at an upcoming show. If anyone has any questions or any quiries just pm me or contact Custom Carbon on 07 38652014 hope to meet up with alot of you in the future.

post-25424-1134856996.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I seem to the be only person that is using a Haltech 2500 on an NA motor, I've installed a Bosch DBW throttle body to the OEM intake manifold and am having problems maintaining AFR even with the wideband o2.  It will run extremely rich at idle and up to redline, but under load it will go extremely lean in the 20s and i'm essentially having to rev it over 4k and feather the clutch to get it up to speed.  I've read a few other threads of about the butterfly, it seems removing the vacuum to it is supposed to have it remain open, i've noticed no difference under 4k with the vacuum line to it plugged.  I'm hoping someone here has had luck using the NA manifold with Haltech, and if they happen to have a tune for it.  
    • I don't know any details, but I really wouldn't be surprised if they do it as a LHD only version, at least initially.
    • Thanks for the replies everyone. Definitely a coolant push. Oil catch can is empty and always has been. As the engine is out now I'll be having a good look over things. I do have some detonation on the piston tops from a trigger issue back about 5 years ago. I felt it and shut off then bought a new ecu and changed the trigger. Never been an issue since. It never hurt the power, its made almost 80hp more since that incident but I will pull the bearing caps to take a look. If the bearings are damaged I will do a bottom end refresh. Head is being re conditioned at the moment and the block will be cleaned and checked to ensure it's flat. I'll go with a kameari gasket and see how it ends up. The other thing I'm not super keen on is the cylinder colours. I suspect this is from the inlet manifold. The plan will be to put it back together, retune and then stick a plazmaman billet inlet on it and retune. I'm happy with the power, if it makes a little more, then great, but I would rather just make everything more efficient at this stage.
    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
×
×
  • Create New...