Jump to content
SAU Community

Recommended Posts

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

obviously theres not going to be a pits that will let everyone off with illegal stuff.

any dual pillar mount is illegal. your bov is illegal if it vents to atmo. your pod needs to be secured properly. your neons must follow the guidelines (ie. mustnt be able to see the tubes at all). your exhaust cant be too loud. you should be able to get permits for everything except the pillar mount and exhaust. they dont do permits for exhausts anymore apparently.

depends on the car, you and the inspector with what you can get away with.

When I got a yellow for being too low, I was told I needed permits for BOV (atmo), strut brace, pod filter, non standard seat rails. Already had permit for dual pillar gauge and exhaust. I went to Welshpool, and that was quite easy...aside from the 4 hour wait in line. They inspector crossed everything off, took it around the block and gave me all of the permits.

My brother in law is a cop, I asked him about permits and stickers and what he looks for. He told me that if he sees any more than 5 aftermarket mods he will ask to see permits. If no permits he will send the car off to get them, ie sticker.

He also told me that this is what he did, not a written policy - they can give you a sticker for any mod that doesnt have a permit.

If you are worried about getting a sticker off, it would be worth while IMO to go and see guys like C-Red, they have modded cars with permits and deal with the guys at the pits often enough to know what is ok and what isnt. Might save a bit of hassel.

Yeh I got done on Sunday night in the City at a booze bus, my friend behind me in his 180 also got done. On the way to go to Vic Park. Cant believe I got done for not having a permit on BOV and sticker on the windscreen. Had permits for everythin else. Twas such bu***hit! Thought to myself can they do this?

The cops we got were such b**tards. Said things like

- "this is what you get when you drive a car like this"

- "use your brains when buying a car"

- "You think youre car's hot, its not!"

- "Tell your friends that were coming to get them and that there is no escape"

And we didnt even back talk to get this kinda treatment. Also threatened to be arrested and further fined. I felt it was a real attack on jap cars. Anthing jap was getting sent to the side and checked for a "work order".

Really has left me pi**ed off all week.

Oh and "series 2" what were you doing when you got pulled over? were you speeding or just cruisin along.

Let us know how Welshpool is coz ive been told good things - I myslef have been to Warick and East Perth. Warick sux, East Perth not so bad it depends on who you get as an inspector.

And Im also worried that my suspension my be too stiff - will they check it again? anyone?

Cheers.

i got the sticker off yesterday at stock road got over with everything and got permits for everything .

Twista i was just going along booze bus and they pulled me to the side they reckon my BOV was to load but it was the bus behind me with their airbag or air brakes.

load of crap

Guys you gotta expect to be looked at when you're pulled over because the cars we drive standout from the norm and the cops know that we carry out mods.

If you don't bother getting permits who's to blame. I agree that they shouldn't give you any extra attitude because you drive an import, but remember they are human and will react to any attitude you show them.

When dealing with traffic cops be polite, your're on a hiding to nothing if you give them shit.

My understanding is that any mod has to be within the ADR guidelines (ride heights, noise etc) and technically should have a permit unless the mod is a standard fit to a model of car in the same range.

IE If you own a car that as an option had a larger wheel package available when new, you can fit wheels of that size without getting a permit. Always pays to check with licencing.

Insurance is another issue. HBF told me that my car will be covered as long as all mods are permitted by licencing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...