Jump to content
SAU Community

Recommended Posts

  • Replies 68
  • Created
  • Last Reply

Top Posters In This Topic

obviously theres not going to be a pits that will let everyone off with illegal stuff.

any dual pillar mount is illegal. your bov is illegal if it vents to atmo. your pod needs to be secured properly. your neons must follow the guidelines (ie. mustnt be able to see the tubes at all). your exhaust cant be too loud. you should be able to get permits for everything except the pillar mount and exhaust. they dont do permits for exhausts anymore apparently.

depends on the car, you and the inspector with what you can get away with.

When I got a yellow for being too low, I was told I needed permits for BOV (atmo), strut brace, pod filter, non standard seat rails. Already had permit for dual pillar gauge and exhaust. I went to Welshpool, and that was quite easy...aside from the 4 hour wait in line. They inspector crossed everything off, took it around the block and gave me all of the permits.

My brother in law is a cop, I asked him about permits and stickers and what he looks for. He told me that if he sees any more than 5 aftermarket mods he will ask to see permits. If no permits he will send the car off to get them, ie sticker.

He also told me that this is what he did, not a written policy - they can give you a sticker for any mod that doesnt have a permit.

If you are worried about getting a sticker off, it would be worth while IMO to go and see guys like C-Red, they have modded cars with permits and deal with the guys at the pits often enough to know what is ok and what isnt. Might save a bit of hassel.

Yeh I got done on Sunday night in the City at a booze bus, my friend behind me in his 180 also got done. On the way to go to Vic Park. Cant believe I got done for not having a permit on BOV and sticker on the windscreen. Had permits for everythin else. Twas such bu***hit! Thought to myself can they do this?

The cops we got were such b**tards. Said things like

- "this is what you get when you drive a car like this"

- "use your brains when buying a car"

- "You think youre car's hot, its not!"

- "Tell your friends that were coming to get them and that there is no escape"

And we didnt even back talk to get this kinda treatment. Also threatened to be arrested and further fined. I felt it was a real attack on jap cars. Anthing jap was getting sent to the side and checked for a "work order".

Really has left me pi**ed off all week.

Oh and "series 2" what were you doing when you got pulled over? were you speeding or just cruisin along.

Let us know how Welshpool is coz ive been told good things - I myslef have been to Warick and East Perth. Warick sux, East Perth not so bad it depends on who you get as an inspector.

And Im also worried that my suspension my be too stiff - will they check it again? anyone?

Cheers.

i got the sticker off yesterday at stock road got over with everything and got permits for everything .

Twista i was just going along booze bus and they pulled me to the side they reckon my BOV was to load but it was the bus behind me with their airbag or air brakes.

load of crap

Guys you gotta expect to be looked at when you're pulled over because the cars we drive standout from the norm and the cops know that we carry out mods.

If you don't bother getting permits who's to blame. I agree that they shouldn't give you any extra attitude because you drive an import, but remember they are human and will react to any attitude you show them.

When dealing with traffic cops be polite, your're on a hiding to nothing if you give them shit.

My understanding is that any mod has to be within the ADR guidelines (ride heights, noise etc) and technically should have a permit unless the mod is a standard fit to a model of car in the same range.

IE If you own a car that as an option had a larger wheel package available when new, you can fit wheels of that size without getting a permit. Always pays to check with licencing.

Insurance is another issue. HBF told me that my car will be covered as long as all mods are permitted by licencing.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
    • You have no idea how many goddamn boxes I received these past three months haha Most have been put to use by now though, luckily
    • Not going to pretend I didn't do a bit of junky work this time around, but mostly due to the fact that some things I am not willing to spend days fixing right now, like wiring. I try to do most things properly the first time around.
×
×
  • Create New...