Jump to content
SAU Community

Recommended Posts

i've been lookin at the dep rate of these cars for a while now. from what i can gather, they seem to lose around <5k a yr (base model). do u reckon its possible or safe to say that we'll see the 350z around the < 41k mark at the beginning of next yr (jan, 2006) ?

lowest price ive seen a 350z go for was $45000 and the the lowest price for a rx-8 was $39000.

just like our belovered R34 which had a price tag of 45-47k in 2003 and it dropped significantly in 2004.

maybe im dreaming, but anything is possible. i say this becoz i want a 350z bad but ive only got around 40k to spend.

what are your opinions ?

I reckon theres a big difference btw what pple are asking for and what pple are actually willing to pay.

So u may see someone asking for $XXX on the papers, but that dosent mean he will actually get it.

Its ridiculous to see a 60k car depreciate just 5k a year esp in the first few years. If u ask me, i would personally put it at 8-10k for the 1st year, and mebbe 6-8 for the following year.

Think abt it. If it was asking 65k brand new...and it actually just depreciates 5 k a year, would u pay 60 k for a 2nd hand one when u can put in 5 k more and get a brand new one? At that level where u are forking out 60k for a car....how significant would 5k be?

Dealer will bend you over.. they always do on a trade-in.

There is no solid rule of thumb.. Nissan sports seem to hold their value a lot better than your average commodore or worse still, falcon. Just have a look at the current price of an average S15 (200sx) of around 2001 to get a bit of an idea of where the prices will be in about 4-5 years.. They were on sale for $45k I remember new for a few years.

350Zs will start dropping in price, now that the "honeymoon" period for the flash new coupe are over. It doesn't help that there is a "newer" model that makes more power. Coupes are fashion cars, and so after their initial release, when everyone wants one, the price drops as people move on to the next car.

It happened to the Monaro. When they came out, they didn't depreciate at all (some people managed to sell them above list price a year after, with the waiting period) but now that you see the Aussie 2 door taxis everywhere they're back to depreciating again.

The 350Z is the same. When they came out, they were pretty uncommon on the road and there was a 3 month wait for them. Now that you can't turn around without seeing one, the prices will drop.

And we've seen from HSV resales what happens when you churn out a new model every year with a little more power. With the 35th Anniversary model out, regular Track models might drop in price too.

The S15 held its value well because of its publicity, and then being discontinued. After winning PCOTY every arriviste wanted one (along with people who wanted to drive a quick Aus-delivered coupe in the $40K price bracket, and your hektic bros wanting to be "different" from their WRX counterparts), and when Nissan stopped building them people who would have paid new-car price couldn't get one, and so buoyed the used car market value.

Just wait for the "new"- RX-7 to come out-

I think the prices for rx-8will drop even further- faster!

If we do evetually get the new Skyline you'll see the 350z drop quite a bit!

How long befor the R34 GTR's are under 50k- their getting close?

I reckon theres a big difference btw what pple are asking for and what pple are actually willing to pay.

So u may see someone asking for $XXX on the papers, but that dosent mean he will actually get it.

Its ridiculous to see a 60k car depreciate just 5k a year esp in the first few years. If u ask me, i would personally put it at 8-10k for the 1st year, and mebbe 6-8 for the following year.

Think abt it. If it was asking 65k brand new...and it actually just depreciates 5 k a year, would u pay 60 k for a 2nd hand one when u can put in 5 k more and get a brand new one? At that level where u are forking out 60k for a car....how significant would 5k be?

Things such as Vehicles depreciate on the reducing balance method.

For example:

Vehicle was purchased brand new for $60,000 and will be depreciated 15% RBM

1 year later: Vehicle has Depreciated $9000, Carrying Value: $51,000

2 years later: Carrying Value: $51,000, Depreciated (15% of Carrying Value): $7650 Current Value: $43,350

So in 2 years the Vehicle has an Accumulated Depreciation of $16,650

This works that the vehicle is depreciated more in its younger years and depreciated less in its older years.

Now if we did the same vehcile using the Straight Line Method were it is depreciated exactly the same ammount each year.

Vehicle was purcahsed brand new for $60,000 and will depreciate 15% SLM

1 year later: Vehicle has Depreciated $9000, Carrying Value: $51,000

2 years later: Carrying Value: $51,000, Depreciated $9000, Current Value: $42,000

So in 2 years the Vehicle has an Accumulated Depreciation of $18,000

Between the 2 methods there is a difference of $1,350, but if i were to continue in the years the difference would get much greater...

Aussie cars dont depreciate that much compaired to the ones overseas..............the 'drive em till they explode' culture prevents that. once the new car warrenties run out on them all and they need to be serviced they're price will fall quite a bit.........

Things such as Vehicles depreciate on the reducing balance method.  

For example:

Vehicle was purchased brand new for $60,000 and will be depreciated 15% RBM

1 year later: Vehicle has Depreciated $9000,     Carrying Value: $51,000

2 years later: Carrying Value: $51,000,  Depreciated (15% of Carrying Value): $7650   Current Value: $43,350

So in 2 years the Vehicle has an Accumulated Depreciation of $16,650

This works that the vehicle is depreciated more in its younger years and depreciated less in its older years.

Now if we did the same vehcile using the Straight Line Method were it is depreciated exactly the same ammount each year.

Vehicle was purcahsed brand new for $60,000 and will depreciate 15% SLM

1 year later: Vehicle has Depreciated $9000,   Carrying Value: $51,000

2 years later: Carrying Value: $51,000, Depreciated $9000, Current Value: $42,000

So in 2 years the Vehicle has an Accumulated Depreciation of $18,000

Between the 2 methods there is a difference of $1,350, but if i were to continue in the years the difference would get much greater...

Accounting gives me the shits, piss easy but OMG how boring. :chairshot

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, this is probably where a wiring diagram and a multimeter come into play.
    • I can say to anyone thats doing this; having done a number of R clusters; just be careful if its an unknown cluster.  It takes a bit of force to pull up; but if it feels excessive then its probably stuck. I've had this and pulled the entire hair spring out; and I can tell you; its not easy getting the correct spring replacement with the correct inner diameter and winding. In my case someone had used some sort of adhesive to stick it to the spindle and it pulled the whole spindle out; which the force seperated the hairspring from the spindal and caused it to deform.  You may have to clean it (IPA); or in my case if i'd known i should have used some sort of solvent on it.  Also check out Cruizin Central on eBay. He does all sorts of dials; and you can email him with any custom designs you want. So if you want like certain logos etc...he'll send you a mock of what it will look like then you accept the order and he'll take care of the rest. Fantastic dials and he can do basically any design you want. 
    • Have you confirmed its the actual axles? Also the wheel bearings that mount on the hubs to hold the axles wear out. I replaced mine as they got play in them. It sorted my play issue. 
    • Ive converted a few clusters for the R33 with 320km/h dials. On the back there are some pads which can be bridged or unbridged (using solder or wick braid) to calibrate it. There is one bridge which is for MPH <> KPH; and there are combinations of bridges to offset it. There is probably a diagram  For example; this is my conversion for a 180km/h dial to a 320km/h dial (I put custom GT-R dials on it with the GTS25t layout) If you have J2 soldered (assuming the S clusters have a similar config to the R clusters); you may need to remove that solder
    • Back on topic 😉, these are some of the notable pages from the booklets that are supplied with each weekly parts update. I never knew the BNR32 test mule car had an S13 Silvia front end... *Edit: On closer inspection the test car still had the R32 body, but only the front end had Silvia panels etc.
×
×
  • Create New...