Jump to content
SAU Community

Recommended Posts

Just had mine tinted today and I've forgotton already what the percentages were :D

I Think the legal was 35% light transmission, 15% is a common illegal light transmission film.

I went the legal tint this time.....sick of unwanted police attention

Link to comment
https://www.sau.com.au/forums/topic/76780-legal-tints/#findComment-1406012
Share on other sites

I believe it is 35% sides and 25% or 30% rear. I have often wondered this though, how did they measure it? The only way I could think of it being done is with a light beam of some sort and seeing how much it lets through?

Link to comment
https://www.sau.com.au/forums/topic/76780-legal-tints/#findComment-1406399
Share on other sites

Hi i am a widow tinter in Ballarat .. there is no legal tints now .. but on my skyline i am have 20% rear to the back seat and the front doors are 30% they say as long as you have three mirrors you can have it as dark as you want .. But yes it used to be that the car had to be 35% legal shade .. go and see the RTA and tell them what is going ..they should have a light metre and by rights should cancle that defect notice if ur only have 38%.. Bill

Link to comment
https://www.sau.com.au/forums/topic/76780-legal-tints/#findComment-1406909
Share on other sites

For a Coupe. ONLY the passanger and driver windows have to be 35%. The Smaller ones and the rear one can be as dark as you want.

Not quite true there my man! well at least not here in SA, I had some seriously dark tint in the quarter panels and the back, and no tint at all in passanger and driver windows and I was told I had to take them out, so...hope its different over there.

Link to comment
https://www.sau.com.au/forums/topic/76780-legal-tints/#findComment-1407024
Share on other sites

Not quite true there my man!  well at least not here in SA, I had some seriously dark tint in the quarter panels and the back, and no tint at all in passanger and driver windows and I was told I had to take them out, so...hope its different over there.

Yeah if you were in melbourne you would not have any trouble with that. I got told this by Tint-A-Car so they can only offer to do the car legally.

Link to comment
https://www.sau.com.au/forums/topic/76780-legal-tints/#findComment-1407552
Share on other sites

There was an R32 GTR in at the Tint place I was at having the tint removed from the rear quarter windows and rear screen for the pit inspection as it was deemed illegal, law probably varies from state to state, but i'm pretty sure 35% light transmission is legal in WA.

(They test with a tool that kind of resembles a G clamp but with an opening just big enough to slide over the glass, all tint places will have them)

Link to comment
https://www.sau.com.au/forums/topic/76780-legal-tints/#findComment-1407895
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Maybe it's time for a M3 F80 LCI, and leave it stock.  Drive it to a shop, sip on your latte with nutmeg whilst it gets serviced and on the way home swing by and grab some chai mix for the evening.
    • Great work! Thanks for documenting the process.
    • How would you even adjust the clutch if the pedal already has the correct free play? The operating cylinder has no adjustment in mounting position or rod length. On pull style clutches there is also no ability to adjust the bearing carrier. Push type I can see how adjusting the carrier height makes it all work.   If this is the twin plate clutch did you verify that your friction disks were oriented correctly? It's not mentioned in the directions at all you just have to notice that one side the friction disks have a part number on the hub fingers and a subtle coning to those fingers. Another thing that I noticed was if you put the friction disks in backwards the pressure plate fingers will not be even and flat when the clutch is installed.
    • yeah, mechanically, it is probably do-able, off the top of my head, there would be the transfer case, which I believe will bolt up to the rear of the RWD transmission, the shorter rear tail shaft. A front drive shaft, front diff, engine upper sump, front drive shafts, front hubs and front AWD struts (they are shaped around the front drive shafts), LCAs (at the very least from the front suspension) oil cooler.  You might want the rear diff from an AWD too, so you can be certain the front and rear diff rations are identical.  Who knows what brackets and mounts you might need.  So a whole doner car might be the best option if you need to maintain RHD. Then actually making it work, that would be a whole different story.
×
×
  • Create New...