Jump to content
SAU Community

Recommended Posts

Hey,

I'm looking at buying a R33 and it comes with no rego, but the problem is it was converted from NA (RB20E) to turbo (RB25DET). I was wondering if I need a engineers certificate for it all to be registered? Or would it just be classified as a engine swap?

If you need more info let me know.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/77395-r33-na-to-turbo-help/
Share on other sites

That's no good :D

Skyline33: It's 1995, manual, and i'm getting a pretty good price just under $16k, it also has some mods.

I guess I'll loose my deposit then, just to ask, why wouldn't you guys touch it? For RWC/rego reasons? Or just because it's been converted??

Thanks.

Yeah fair point, but does anyone know the legalities of the situation? Do I HAVE to get it engineered? Or can it be classified as an engine swap? I havn't really got my hopes up on the latter option obviously as there's a turbo there that wasn't before :)

if you didnt get the conversion done yourself, then follow everyone else's advice and dont get it.

if you originally got an n/a and THEN organised converting it etc then that would be fine, otherwise, find a car thats registered/can be registered, and to what you basically want (manual turbo if you want that)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Starter motors used to use the weight of metal (magnets) to provide torque. Now they use (more) current instead. This. It's completely normal.
    • So thing that had me stumped, but I think is OK....is that when it was up in the air, in neutral I had it running to bleed to coolant while I put the wheels back on. I noticed the rears were turning (slowly) which I'd never seen before 20250928_163512.mp4     Because there had been an issue with clutch slip due to pedal adjustment on the dyno, I assumed there was still and issue so spent some quality time upside down under the dash adjusting the pedal....but no matter what I did the wheels still turned in neutral. Even disconnected the master cylinder to pedal rod and same. In despair, I even removed the clutch slave so there was no chance of any preload causing it.....still happened. So either: 1. Something is not right in the bellhousing, or 2. Its a thing sometimes with cold, thick gearbox oil Internet says it might be 2, I hope so!
    • OK, few more things sorted and it is ready for a shakedown on 10-Oct, with one weird thing. Changed the run in oil and filter for the good stuff. 8l came out, about 8.5 went in with filter so that looks all good. Changed the starter (again), this time for a brand new one, works good. Interesting that the Taaaarks one is shorter than factory but spins harder, I guess electronics have moved on a little in the last 30 years. Will be nice to have a bit of extra space under there. Put the timing cover back on, and noted where the cam gears were set as a record.  Will need to double check the timing but it is pretty close. Also put the coil pack cover and intake snorkel back on. Exhaust Inlet Changed the water out for coolant, bled up nicely. Removed the rear brake pads (well worn factory sumitomo ones!), gave the hardware a good clean and reassembled. I've put bendix XP on the back again because the price is excellent at $150 a set and they worked well on the V37. Front pads have plenty so no issue there
    • Mine is all -12, I’m running a dry sump in a billet block though 
×
×
  • Create New...