Jump to content
SAU Community

Recommended Posts

Hi Guys!!

Jspec Surge Tank: $150 + postage

Jspec Oil Cooler: $ 170 + posage

Both $300

pics below:

Surge Tank

Oil Cooler

Oil Cooler-

This unit is capable of supporting enough Oil flow for engines in excess of 1000 horsepower, and is ideal for forced-induction engines but all N/A Cars will benefit from Having an Oil cooler of this Quality

core size is 600x120x70

you can request if you want it polished or with a silver anodized finish

(no cost difference)

also has the brackets already welded..

Also the fittings on the oil coolers are able to be put on the one side but there is an extra cost because we need to put a separator/divider in the end tank that supports the outlets, 10$$ extra fee for this requirement, also the core is a bar and plate Garrett intercooler

Surge tank -

1.5 litres and has 10mm fittings; it is 80mm thick by 250 in height, also has the fuel pump bracket fixed in so your fuel pump is safely connected at all times

Cheers,

Jase

Link to comment
https://www.sau.com.au/forums/topic/78403-oli-coolers-surge-tanks/
Share on other sites

Cost on postage for cooler to Banora Point NSW 2486 please?

I will require that the inlet and outlet are on this side please quote accordingly

____________Engine______________

inlet ___________________________

outlet__________________________|

On the back left hand side

Cheers

  • 2 years later...
Hi im interested in both parts but i cant view the pictures

could you post some more or send me some more pics?

also do you have some polished ones suitable for an r33 gtst?

2005 buddy

  • 1 month later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...