Jump to content
SAU Community

Recommended Posts

Hey y'all.

As some of you know, my plan is to get an R34 GTT 'round the middle of next year.

Well.... i am kinda considering a Stagea now too. I would love to have a wagon to put my bike in and its hella sexy too.

Any opinions? What would I be looking at paying for a '99 - '01 Stagea? 'round 40 - 50k ?

Thanks.

Christian

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/
Share on other sites

Am I the only one that thinks the Stagea is a very ugly piece of machinery? I'll go as far as saying, if I was looking for a car like that, i'd go buy a Turbo XR6. I'll even stick my hand in the oven and say i'd buy a VY SS Commodore over a Stagea. Plenty of room, quick, big potential, and a bit of style :mad: :uh-huh:

Buy the R34 :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/#findComment-114686
Share on other sites

Guest Boxhead
Originally posted by Morgs

Am I the only one that thinks the Stagea is a very ugly piece of machinery?

yes, you are the only one...

prank, get what you want, evaluate everything, including space etc.

i looked at getting one, i think there a bit cheaper then that, but not sure specifically for 99 onwards, if you go for a 97ish you could get one for udner 30 i would say...

i like them, however i dont think many bodykit joints stock copies for them, so if you brake a front bar etc, you might be up for a bit in getting one sent over...

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/#findComment-114689
Share on other sites

dude the R34 GTR front end fits onto a Stagea. A friend is gettin his stagea in june and its going to be very exciting. Dynamically its obviously going to be inferior to the R34 due to the extra weight high up above the rear end, but you get the practicality tradeoff.

I would be torn too, you just have to look at what is MOST important to YOU and go from there. Gut feeling is pre-modded R34 GT-T as ive been in one on a hard mountain run and it was sick.

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/#findComment-114713
Share on other sites

well, i dont take the bike in the car often, but when i do..

i could just get a towball on the R34... *puke*

Slip - my friend has bought in an R34 with trust exhaust, trust cooler, power fc, seats, 3 pc 18's, fully adj suspension and full kit (silver) and he will be selling it when i am buying, so i will be very keen on that one.

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/#findComment-114755
Share on other sites

VERY responsive to throttle and steering inputs. The ride from the teins was great, with strong midrange exiting turns. A very composed and smooth car even when going rather quick and not being driven smoothly sometimes. Good brakes too. A turbo with maybe a similar exhaust side but bigger compressor for some more hp but with similar responsiveness. It wouldnt need much more as a road/track/road rally/drift car. Loved it, heeeaps better than the R33 GTR ive been in. 34 was 40k with all mods on it, 33 GTR was 50k stock.

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/#findComment-114803
Share on other sites

Slip, I was considering a '33 GTR too, but I am in love with the '34 looks. (besides, i have already done the '33 thing, even if it was only a GTST).

Sounds like you were very impressed by the car. I am looking forward to taking one for a drive. (I have only sat in one so far).

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/#findComment-114811
Share on other sites

i like the stagea, but not as much as i like the looks of the Mitsi Legnum TT wagon... saw a few nice ones at the yards in NZ when i was there the other week... if u go to the takakaira webpage and look at the silver one they have on the main kits page that is the same kit i was seeing on them there. Yes i know theyre a mitsushi7i, but damn they look good.

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/#findComment-114877
Share on other sites

You wouldnt want to buy a Stagea as an outright performance car, they are quite heavy and dynamically they arent that flash. I've got Tein HAs in mine and even with them it leaves a little to be desired. Straight line speed is about on par with an R33 GTSt of the same Spec. As a family car they rock, plenty of space, big doors, good aircon.

In terms of price you'd be real lucky to get one much under 40 regardless of year due to the fact that no-one has compliance under the old scheme. Mine is for sale as it appeared in SPEED for around 50k - bear in mind its the only fully registered Stagea in the country.

Jash

Link to comment
https://www.sau.com.au/forums/topic/7859-stagea-v-r34/#findComment-114986
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...