Jump to content
SAU Community

Recommended Posts

basically you just have to tighten up your aftermarket blow off valve.. or put a plate inbetween your stock blow off valve... or for that fact even remove it and just put a plateover the hole to stop it from being plumbed back or vented... that way the air will have no where to go and ;)... go back through your turbo and out your pod lol... this then making the flutter noise... there are huge debates as to whether or not this royally ****s your turbo.. its know that its not "good" for your turbo, but has been settled upon that on low boost it isnt ogin to wreck your turbo, just perhalps shorten its life.

if you want a VL sounding flutter then you will probably want to get a front mount IC if you dont allready have one as it is said to enhance the flutter noise

ive currently got my stock welded over blow off valve on my car at the moment so i get the flutter... but i usually just have my stock unwelded one on there... just felt like a bit of a change last week :)

-Ruffels

no, it whistles. like Nfsu2, fast and the furious, etc

edit: but you can achieve it to a degree by winding down the spring ie making it tighter. this will cause "reversion" which will cause the chatter noise you are talking about. There is debate as to just how bad this is for your turbo... I think so long as you have air coming out of your BOV (ie turbo is still spinning forward), it's not too bad.

++++

Greetings All.

Oh...I thought the HKS SSQ BOV made this noise...?

Bugger...

Cheers Guys,

--Tonba

++++

SSQV is the perfect sound whistling is the best sound u can ever want to have =) I have it on my 33 and its the best, Supersonic type bov, that makes those Pssh sounds, sounds better on the WRX's.

hmmm hks ssqv sounds like a bird dying or getting sucked into the turbo or something, i don't like it hey.:whatsthat

for the, as you decribed it, perfect bov sound

1. buy a vl turbo

2. make sure its an auto

3. get the biggest bov you can find

4. get a fmic so everyone can see your cars turbo

5. get a pod filter

6. tighten the bov as much as possible

7. sit at traffic lights/pedestrian crossings/intersection and hold your foot on the accelerator and brake at the same time and then back off the accelerator.

8. look around to make sure everyone is looking at you

9. take off doing a sick one wheeler :burnout:

Disclaimer:This is not intended be provoking everyone with vl turbos, only the ones that do shit like this. :sly:

PS back to the point of the thread.

You can get the "fluttering" noise too if you have an external wastegate, different gates make different noises when you back off and some seem to make an almost fluttering noise as you describe.

The bov fluttering noise everyone says is bad as its reversion but my old 33 made the fluttering noise as i had no bov at all and the hks turbo on it had no shaft play last time i checked and still worked well.

Jamie

You can get the "fluttering" noise too if you have an external wastegate, different gates make different noises when you back off and some seem to make an almost fluttering noise as you describe.

*makes Cyph3r a badge that says "I have never heard an external wastegate in my life"*

wear it proudly my good man.

perhaps someone with an external wastegate that is open to atmo will see you with it and take you for a spin to let you hear the sound that an external wastegate dumping to atmo actually sounds like.

*makes Cyph3r a badge that says "I have never heard an external wastegate in my life"*

wear it proudly my good man.

perhaps someone with an external wastegate that is open to atmo will see you with it and take you for a spin to let you hear the sound that an external wastegate dumping to atmo actually sounds like.

lmfao *grabs the badge and pins it to my shirt*

i have definately heard one before mate, i wasn't talking about when it is wide open on full boost and it roars, i was talking about on gearchanges.

maybe its just my old car and my mates car that do it and all the rest in the world don't but they distinctly made a segmented rather then continuous noise. on my mates car you could hear the bov was continously open while the wastegate "sounded" like it opened and shut a few times.

Jamie

so describe this sound.. or record it and attach here.

it could just be that the bov wasn't able to vent enough.. and therefore even though it was venting everything it could, there was still some reversion through the turbo..

I really can't see how a wastegate that needs say 15psi of pressure to open could close and open on gearchanges.

I don't see how there can be fluctuating pressure in the exhaust manifold/turbine area during gearchanges which go from 0 to somehting above the spring pressure of the wastegate to cause it to open and shut.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
    • Ok, disregard my “rate them” comment, sorry for my unrealistic input
×
×
  • Create New...