Jump to content
SAU Community

Recommended Posts

Hey all

I own a 95 r33 gts25t. I currently have TEIN Type HR adjustables instaleld and i find them to be way to stiff for the sydney roads but they are fine on th highway.

Cause i do a lot of city driving, i want your input on a set of new springs and struts. Any feedback from your experience would be great, what im looking at getting is something with a good ride quality and good handling and what you paid for yours? and possibly any combos such as KYB and king springs etc???

Thanks

Rob

Just grab some 200 front and 150 pound rear springs, If the HRs are in good condition then i would hope they would be ok with a far softer spring. You can buy Bilstein springs for abotu $150 each, adn i understand Eibach springs go for about the same...may help!?!?!?

Do you know where i could find some 200 pound and 150 springs? or would i have to get some made up.

My rear strust seem to be making some rattling noise while driving over dumps. not always but sometimes, im thinking its either lose or their stuffed

  • 2 weeks later...

What type of Bilstein shocks should you get?

There a few on the catelogue, a part number would be great.

What progressive rate spring should you recommend? Are kingspring low's progressive rate, what bilstein sping do you recommend,.

Do you know where i could find some 200 pound and 150 springs? or would i have to get some made up.  

My rear strust seem to be making some rattling noise while driving over dumps. not always but sometimes, im thinking its either lose or their stuffed

Heasmans at Sydenham are Eibach agents, they have most spring rates in stock. They can also check the shocks and they have a shock dyno if you want ultimate testing.

:P

hi, i have been told i need to get new shocks and springs 4 of, could you guys give me a list of good ones that are ok for road driving and are a little stiff but not bone shaking and are priced well around the 600 to 700 pounds mark, not to sure what that is in dollars, cheers , r33 gts-t. :confused:

You will hear the rear dampers alot more than the front as they are in the car with you. I had pillow ball upper mounts on my set of Tein HA and they were a little noisey. You also get more spring noise with the a/m susp ive noticed. Stick with the Tein's just soften them up.

Teins = Own league = On rails!

I have what SK suggests

The Bilstein shocks and Whiteline springs

Did alot of searching for prices and found Unique Autosports to be the best

I still have the receipt in my pocket...so here's my prcies (be warned though, UAS i think have raised em a bit since)

4 Bilsteins at $225 each - $900

Whiteline lowered springs $225

Sub Total $1195

subtract 10% for being a SAU member $119.50

TOTAL $1075.50

Good luck in the hunt :)

I am thinking of going 300lbs front and 250lbs rear springs on mine.

Anyone got similiar spring rates on theirs? I finially got adjustable front/rear swaybars going on also.

King springs want $250 for the pair custom made. Some people say king springs are rubbish and to get some koni ones instead??

I am thinking of going 300lbs front and 250lbs rear springs on mine.

Anyone got similiar spring rates on theirs? I finially got adjustable front/rear swaybars going on also.

King springs want $250 for the pair custom made. Some people say king springs are rubbish and to get some koni ones instead??

R33GTR or R33GTST?

What are you going to use the car for?

Normal road tyres, or R's, or slicks?

What tracks, if you are doing circuit work?

Any drag at all?

For circuit work we find using more than 200 lbs rears is only necessary on tracks where we run 450 lbs in the front. Philip Island being the highest spring rate we use. I can't imagine needing more than 200 lbs on the road and for drag use closer to 150 lbs is better for launch grip.

:)

R33GTR or R33GTST?

What are you going to use the car for?  

Normal road tyres, or R's, or slicks?

What tracks, if you are doing circuit work?

Any drag at all?

For circuit work we find using more than 200 lbs rears is only necessary on tracks where we run 450 lbs in the front.  Philip Island being the highest spring rate we use.  I can't imagine needing more than 200 lbs on the road and for drag use closer to 150 lbs is better for launch grip.

:)

GTS-T

It will mainly be used for track as I now have another car as a daily driver.

Tracks will be PI, Sandown, Calder and Winton.

Will be using hankook silica 104 for now and then semi comps when the bank account recovers.

There might be a few drags in there but I cant see myself forking out more $$ for nittos just for the drags.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...