Jump to content
SAU Community

Recommended Posts

why dont we share more maps?

mine are a little messy, these were getting around 240 rwkw on rb25 pretty rich

running a gt3076 hybrid .5 comp .73 exh

740cc, z33, normal mods 17psi

any constructive advice welcome, i'm still learning!

post-34685-1200755773_thumb.jpg post-34685-1200755548_thumb.jpg

post-34685-1200755823_thumb.jpg post-34685-1200755877_thumb.jpg

post-34685-1200755906_thumb.jpg post-34685-1200755938_thumb.jpg

post-34685-1200755990_thumb.jpg post-34685-1200756016_thumb.jpg

post-34685-1200756042_thumb.jpg

i dont run less ign timing, i run zero. so that whole top row under SETTING, IGN MAP is all 0's

i did it for a bit of fun. that row is only touched on gearchange or when you back off on the throttle.

ie at normal idle you are on P02 as there is airflow load. when you dump throttle or gearchange airflow drops to 0 or near zero so it hits row P01.

running 0 deg IGN timing makes the car pop, fart, backfire, crack so its just a bit of fun. i love it. everyone comments on how much my car pops, farts and backfires when driving around. i dont believe there is any other gain than noise to be honest :)

Power FC doesn't drop to PO1 on gear change, check your map trace

hey guys thanks for the info... i really need to get me datalogit (of fc tune) if it was out....and also a wideband oxygen sensor....

thanks for the info guys....also post your fuel consumption please

may i ask if you post your current tune with its fuel economy....

like you did before with the excel spreadsheet...please

its about the same - not much has changed

ive done some knocking fix but thats about it

the INJ map is still the same

im getting about 460kms on a full tank with city driving etc

why dont we share more maps?

mine are a little messy, these were getting around 240 rwkw on rb25 pretty rich

running a gt3076 hybrid .5 comp .73 exh

740cc, z33, normal mods 17psi

any constructive advice welcome, i'm still learning!

post-34685-1200755773_thumb.jpg post-34685-1200755548_thumb.jpg

post-34685-1200755823_thumb.jpg post-34685-1200755877_thumb.jpg

post-34685-1200755906_thumb.jpg post-34685-1200755938_thumb.jpg

post-34685-1200755990_thumb.jpg post-34685-1200756016_thumb.jpg

post-34685-1200756042_thumb.jpg

your IGN map under 3k looks fairly relaxed you should dial in some more IGN timing

will give the car some good response

I'd say there are two important factors in achieving the fuel range Paul is getting:

1. engine output. I think he is running under 200rwkW. "Normal" driving even with change ups under 4000rpm and not running big throttle settings will probably put through less mass air flow, requiring less fuel usage. That difference would be marked against your powerhouse. If Paul put up a chart showing AFM voltage output vs rpm for a typical city run it would show some good info.

2. whether the 460km is "with" city driving, or "predominantly" city driving. I can pull that sort of range with a little (lot) of luck, but have to be right out of the throttle. There is some interpretation in describing the use there. My fuel logs have been maintained meticulously over 30000km, and have an arithmetic average of 7.9km/l over that distance. So 400-410km per tank is the norm, with a fill being 50 litres plus/minus 2 litres.

no, nothing differently really, i drive fairly relaxed, 40psi at all 4 tyres, constant throttle (dont vary TPS lots while criusing)

02 feedback is on with default 02 co-efficient 1.047 from memory in datalogit and thats in

on light cruise on the INJ map im near 0.94x ish and sometimes lower

most people i see who get poo economy are still like 1.000 on light cruise on the INJ map which is stoich

i think i go near 16 AFR on light cruise, so that would explain some of it

do you guys suffer from a sligth gurgling and popping on overrun???

mine is doing this and occasioanlyy there will even be a slight backfire...new splitfires and copper plugs at 0.8...no atmo bov.

runs fine on dyno on power up but with slight open throttle then she has this issue...

do you guys suffer from a sligth gurgling and popping on overrun???

mine is doing this and occasioanlyy there will even be a slight backfire...new splitfires and copper plugs at 0.8...no atmo bov.

runs fine on dyno on power up but with slight open throttle then she has this issue...

Sounds like the TPS is set incorrectly; it should cut fuel on decel.

With the rb26 base map in mine I would get popping and farting between gearchanges and slight throttle inputs. The rb26 ign map runs bugger all ignition in the first couple of load rows. Pushing those back up to the norm completely removed the back fires and gurgle/pop with slight throttle input on decel.

  • 3 years later...

I hope I don't get into shit for this but I'm bumping this up because there is some awesome content here and rather than start a new thread, I think people should share and ask here.

Anyhow I was just fiddling with my car which was suffering from lean pop. To get around this I just adjust my correction(it was around 0.98) to about 1.08 to 1.1. This got rid of my lean popping but I don't know if the lean pop is a sign of an issue or just due to the fact I am running Nismo 740cc injectors...

Further that, I would like to tweak some little things with my car before I go to get it tuned properly, just so I can learn some new things on the way. My car suffers from burble and spluttering on VERY light throttle regardless of gear. Chap above said to add more timing but as it stands I am currently not able to do any driving while logging thanks to the battery on my laptop being a bitch and not working so I need to always be near a power point. What cells are these which are often related to the cruising with tiny throttle?

welcome to 2008

use map tracer to find which cells you touch on light cruise

I'm currently getting about 370km to the tank of, I wouldn't say city driving, but normal street driving with the occasional squirt. Will increasing this light throttle send this to the shitter? I was looking back at your old figures for cruising AFR's and you say to run a little richer when above 80km/h so once I get, as VLT said, an inverter(rather than that, ill just get a laptop charger which can pump 4a and use that), ill get it on the road with a wide band and just have a f**k around with it. I'm not interested in touching any of the power cells, just the cruising and light load.

Ill put some screen dumps of my ignition timing and injector map as it stands.

Also I am running Nismo 740cc injectors, 55% correction and +10 latency.. Correct?

post-68383-0-54975300-1319810745_thumb.png

I don't have a wideband yet but I will be getting an AEM Uego unit hopefully tomorrow if this guy answers his phone!

I'm close to the money on the settings as it seems, maybe ill give it +14ms and tune from there.

At the moment, I am not doing anything fancy, just sorting out the pops and splutters on idle and cruising, so ill be adding more fuel rather than pulling which should be safe to do without a wideband. I just listen to it and when the pops are gone I know I'm done lol.

Quite interesting this tuning stuff.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...