Jump to content
SAU Community

Recommended Posts

Just wondering...

We ***** an apparently "STOCK" R33 on saturday night. It looked pretty stock but who knows.

Our car has:

3" turbo back haust

Boost Controller (11psi high boost)

Blitz BOV and Standard (is this our problem??)

K&N Filter (were running a HKS one but it was too loud (and the foam was crumbling))

If the other was stock and we have this done to our car.. how could it be faster??

I had two in my car (including me) and he had 3...

I'm just shocked...

:eek:

Any thoughts would be greatly appreciated

Link to comment
https://www.sau.com.au/forums/topic/806-whats-wrong-with-my-car/
Share on other sites

Best place to see what you can to is Willowbank on tune and race nights. Next being Wed 19th. Cost $27 for you, car and one other(pit crew). It's pretty casual and you get as many runs as you can fit in depends on how many cars are there. See you there???

Nismo Girl

Could be a number of things.

Weight (you had more people in it, my car is even slow with 3)

Clutch (yours may be slipping a bit )

Tyres (his may have been great off the line)

ecu (he may have had an aftermarket ecu which you can't see)

I wouldn't be to concerned abotu loosing, I used to get ticked off when I got beaten by gemini's and swifts but then I realised that so long as my car is running well then the fact is that the other person simply has a faster car.....bit like what people think when I beat them I guess, some spend more on mods than others ??

I'm not really *worried* or *stressing* about it its just that its a bit of a piss off really!!

I've gotta find myself a job before too long so we can keep the thing on the rod.

And Boostmeister... I had 2 people. He had three so weight wasn't really an issue.

The payments for the car actually come out of my pay in the way. The rego and insurance is coming out of my pay in the bank. The petrol goes on my credit card and then my pay pays the credit card off..

Are you trying to say that its his car I just think its mine??

my wife drive our car all the time I don't ahve a problem with it you should see thelook on her face when I winded up the boost.

now we have stock turbo she wants the power back.

so guess what hte turbo is being hiflowed

cheers

meggala

some times you just loose my car looks stock but has lots of goodies as well and no noisy bov either

Three different people told me this car was stock after all going over and looking under the bonnet. I didn't go look cause i wouldn't of had a clue what i was looking for!!

He only just got it a few days before that. So ...

What internal mods can be done that cant be seen that could make him fasT??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It's not as simple as it is being made out to be. It s not hard, but there are things that have to be done. Am busy right now, but will try to essay later.
    • Pinout is different to my knowledge, but you should confirm to be sure. Also you will need to adjust the VQ table in Nistune to suit. I would still recommend sticking with recirculating BOVs, I'm not sure if the R35 card MAF will fully resolve stalling caused by reversion/throttle lift.
    • What issues are those? Previous owner said it wants to stall sometimes. We did test drive and it was nice and smooth so it will be sporadic or idk. And if i just change MAF(the sensor to R35 version) it should be better? And as i asked...is it like "plug n play" with oem MAF from R34?  This is a MAF from R35 right?
    • Even with no BOV you will have issues unless the MAF is a hot film type like the R35 which has some design features to deal with reversion. Hot wire MAFs are very sensitive.
    • So i just change the (whatever is inside ma original MAF and slide the R34 MAF (it is gonna fit right in? ) and somewhere on the hot side a BoV...i presume that would be vented to the atmo? I just "trying" to understand...maybe my mechanic would know this   I would not mind(even prefer) to run stock BoV cuz it is way more than fine but i do not have that and only pipeing what is left is oem J pipe ... I will be running Blitz fmic(to fit oem one side style) and i gonna need custom pipes cuz i do not have rest of those pipes and hoses... But i am want standalone ECU. Only choice i have atm is Nistune...but that is not gonna cut it right?I dont know what Nistune can and cant do... I know you guys know Link and Haltech...but whatabout ECUmaster? I know guys in here run those but i literally do not know about that and do not know differences... Just know to take whatever "my" tuner can work on.  
×
×
  • Create New...