Jump to content
SAU Community

Recommended Posts

Hi,

Just wondering how you can determine the difference between a S1 and S2 R33 GTST ignitor coils?

I've read the S2 are slightly different. If anyone has any pics of a S1 and S2 ignitor coil could you please post them or put a link to them.

Reason why i ask is because I'm pretty sure i need new ignitor coils but I am unsure if my motor is a S1 or S2 even though the car is a S2 (just the thought of an engine replacement).

Thank you.

Regards

Steve

I know the coils on the s2 "piggyback" a metal mounting system, as such to prevent shorting out from cracking the coils from over tightening. pretty sure with the series one's each coil is one assembly made entirely of plastic, hence the possibility of cracking. I think cracking is more or less impossible on the s2's, given their design. and yeah, no ignitor box, just a connector (at the rear of the valley cover).

That's from my small amount of experience. hope that helps with your diagnosis.

Hi,

I've taken out my coils but I left my camera elsewhere but my coils look exactly like the ones in the pics on page 2 or 3 of the "missfire @ 4500rpm" thread". Is that enought to distinguish a S1 or S2 motor?

Also from looking in the engine bay, cannot see a little black box on top of the valley cover but it could just be me not knowing what i'm looking for. Any more help would be great.

Thanks

Regards

Steve

I don't think there is any apparent physical difference between the 2 types.

At the rear of the valley cover, there may be 4 bolt holes. This is where the ignitor should ordinarily sit if you are running S1 coils and an ignitor. If you just have 4 bolt holes, then you are more than likely running S2 coils.

I have mine out ATM (engine being re-built), so I'll try and remember to get a part number or something off them tonight (they are the in-built ignitor type, but from a Stagea).

I know the coils on the s2 "piggyback"  a metal mounting system, as such to prevent shorting out from cracking the coils from over tightening. pretty sure with the series one's each coil is one assembly made entirely of plastic, hence the possibility of cracking. I think cracking is more or less impossible on the s2's, given their design.

S1 and S2 coils are all like that, even RB20 coils.

The cracking is nothing to do with overtightening, they crack b/c the plastic becomes fatigued and brittle from age and the temperatures under the cover.

The reason why there are less S@ R33's and R34's with cracked coils is b/c they are newer. This problem is not isolated to Skylines, it can happen to any coil on any car.

S1 and S2 coils are all like that, even RB20 coils.

The cracking is nothing to do with overtightening, they crack b/c the plastic becomes fatigued and brittle from age and the temperatures under the cover.

The reason why there are less S@ R33's and R34's with cracked coils is b/c they are newer. This problem is not isolated to Skylines, it can happen to any coil on any car.

Ic... well yeah as i said i dont have much experience, that's just what i deduced from pics i'd seen of coils on other models, and that people said they could crack if you overtightened them :confused: sorry if I gave anyone a bum steer.

I just ran the exact same search I did this morning, and now it came back with results.... go figure. but yeah I always find it's easier for the people helping you if you post a linkie :D

RB25DET coils don't appear to have a Nissan Part#. Only marking I can find (remember, these are off a Stagea RB25DET) is:

HANSHIN

MCP-1330

RB20DET coils appear to be Nissan P/N 22433-60U02

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, fun day was had, I finally found a house that will do me just fine, 1980's brick build, but with full fresh renovations, plus new colour bond fencing all round so puppies are incoming 🐕, and water tanks for the garden, and it's located in West Goulburn..... @Duncan 🫡, so day trips to Wakie to watch cars going Zoom will be on the cards In the end it cost well under my budget and was actually better than alot of the more expensive joints I was looking at, it is in a good area, close enough to the shops, public transport, and the Wollondilly River Weir,  and the great walking paths along the river, but far enough away from town to see minimal traffic The deposit is dropped, the conveyancer is conveyancing and I should get the keys in a week or 2 as the property is currently unoccupied  As with everything I own, I'm doing up a modifications list, as it doesn't have solar, that is first up on the big list, all of the panels and enough batteries to keep the joint warm, or cool, followed by a largish carport out the front, the small list, which will start as soon as I have keys, is some security stuff, like cameras, screens, and the usual "crazy prepper" additions that weird old people like (mouse holes to stick shot guns out of, and the usual man traps that the average person installs for the unsuspecting and unwanted guests 🤣) The gardens front and back are OK, but, not to my standards or liking, so landscaping will be a fun job to start getting into, so when spring is sprung I'll do a heap of planting, lots of natives and vegetables is the plan, the old owners were more "Old English Garden" type, so basically Roses and other weird looking things that are destined for the green waste bin One thing that is staying garden wise is a nice established hedge out the front, it is about 5 foot tall and covers the whole front of the property from prying eyes As for the car hoist, the roof in the garage has some height to it, but, I'll need to get an installer out to see what can be done, width wise may be a issue, but my building inspector will be getting back to me over the next week with his recommendations  Small, but cosy     
    • I tried to get in contact before I went to QLD you didn’t respond, then I tried to contact you in r31 club.  I thought you fell off the earth or something haha.  I will grab it off you but unknown when I will be up that way 
    • I think that might be in the question. He is going very low, and I think the standard GTR ones are simple tripod joints (like the rear NA/S chassis ones), not proper CVs (like R chassis turbo/GTR ones). Proper CVs take the misalignment better than tripods.
    • Do you still need the wiper motor and stuff?
    • I haven't used the Crank Motorsport ones, but can I ask why not use standard gtr/gts4 axles at the front? They would easily cope with that power level. BTW.....sounds like quite the project!
×
×
  • Create New...