Jump to content
SAU Community

Recommended Posts

Nah, just remove the restrictor and all will be good.

have a look down the hole, and you'll see a little piece of metal with a hole in it. Find a screw that'll thread down the hole, just like a wood screw or something, and then lever out with some pliers. Thats the way I did mine.

Have finished the brake upgrades. The RS4 now has the GTST 4 pot with std discs. The 2 pot off the RS4 are now on the 25G after a bit of juggling.

The RS4 and GTST pistons are both about 42 dia. Was surprised to see the 25G singles are 56 dia. Put an BM50 master cyl on the 25G to handle the bigger brake pads.

what diameter are the 25g rotors Hugh?

Might be a bit of an upgrade for my 31 :)

280dia, same as S1 and the GTST rotors now on the RS4.

I am interested in the dogbones to run bigger rotors for when the rwd 25G is turboed.

Well good news for me, a friend of mine is sourcing a set of R34 GT-T front and rear calipers (and short lines from what he told me) in the next couple of weeks. What is the good set of rotors to get? and what do I need to do in order to change my calipers. Are the lines the same? (I have S2 Stagea), Can I still run the Stagea Brake Master Cylinder or should I change that to the R34 one as well.

Yes I know I should be search for this on the forums...but I'm entering this on my mobile phone at the moment during a quick break at work

  • 2 weeks later...

Will the 310mm front rotors fit straight on Wolverine or will I have to do some slight modifications??

I'm just waiting for funds to clear up so I can buy the R34 brakes and rotors from the link you put up (can't came fast enough...brakes are starting to squeal)

Sorry Jase, just saw the post. The rotors fit in fine. I bought calipers and RDA rotors but the brake lines didn't come in the box despite being included :rant:

Everything fitted fine including the rotors but the rear brake lines required braided lines to fit. Maybe be with R34 brake lines it can be made to work??

I should clarify, the BMC is the same size as the R34. The inlet and outlets on Nissan BMC's can be slightly different which may get them different part numbers.

A little over 1200 including freight via DHL. The freight was the killer.

I had no luck looking on Australian brake rotors, at least these fit my car without having to stuff around re-sizing and I don't want to convert my brakes as I mainly use it as a daily. Brembos are awesome, but not something I need as I rarely visit a track.

You shouldn't need to if the rotors are well made.

Best just to measure run out and check. If run out is excessive you'll have to send them back (which is difficult when you bought them from overseas I know).

A little over 1200 including freight via DHL. The freight was the killer.

I had no luck looking on Australian brake rotors, at least these fit my car without having to stuff around re-sizing and I don't want to convert my brakes as I mainly use it as a daily. Brembos are awesome, but not something I need as I rarely visit a track.

This is what stopped me from getting the rotors from RHDJapan (BTW I was the one who got them to add them in) it's the weight of the rotors that makes shipping expensive...didn't matter where I was trying to get them from (RHDJapan, Greenline or Nengun) it was just killing for shipping. Before I found a R34 GT-T set on here I was going to get them from Import Monster.

On the subject of those R34 Brakes, I got them yesterday (Thanks to Wolverine for putting the link on here and tir31 for selling them)...now I know the fronts should be a direct fit but what do I have to do again to get the rears to fit (I remember that you have to trim the dust cover...am I right?? and if I am right by how much and where to trim)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The wideband reading is meaningless if it's not running. Why are you using shitty old sidefeeds on any engine, let alone a Neo? What manifold and fuel rail are you using to achieve that? Beyond that, can't help you with AEM stuff as I've never been their ECU/CAS combo.
    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
×
×
  • Create New...