Jump to content
SAU Community

Recommended Posts

I've got my old front pads (WGNC34 series 1) sitting in a box at home so can't measure from here. Those ones displayed look about right, they are quite a large pad. I couldn't get DB1250 pad here in NZ and they supplied me with a TRW GDB1000 - perfect match to the profile of 1250 just missing the squealer tangs. They are not as dust making as the Remsa pads they replaced.

I fitted Bendix DB1170 when switching to GTST fronts. They squealed like buggery. Replaced them today with RDB1170SM GP MAX. Just as bad. Now what???????????

Also today got another set of GTST for the 25G. They will go on soon as I figure out what pads to get.

have u got brake shims on the back of all pads? if so have u put copper grease or anything in between the pad and shims?

I have the shims but no grease Have to get and order the shim sets from the USA.

maybe try putting the copper grease or what ever in between and see how u go. putting the grease just on the pads a lone with out shims have quietened mine down a lot, but still squeals every now and then.

maybe try putting the copper grease or what ever in between and see how u go. putting the grease just on the pads a lone with out shims have quietened mine down a lot, but still squeals every now and then.

I'll try it

Got my set of shims from the USA today, greased them up and fitted them after work.

Hopefully 'Operation Big Success' and my wife wont cringe at the idea of taking my car somewhere.

Also picked up a set of R34 rears brakes, hubs and all this afternoon.

I wont put them on until I can have a look at what line changes need to be made.

Anyone know what i can do with a pair of R34 hubs?

Thought of selling them to a silvia guy but there kind of useless without brakes....

Hose reel with a rim is all i can think of.

I fitted Bendix DB1170 when switching to GTST fronts. They squealed like buggery. Replaced them today with RDB1170SM GP MAX. Just as bad. Now what???????????

Now buy a decent pad, and don't buy cheap trade servicing rubbish. RDA pads are made in China, and to a very low price point.

Short of that, there are several stick on shim kits available to suit those calipers that will make a huge difference (like the Project Mu ones, $65 for the set), but I'd start with a half decent pad first like HPX or Remsa. If noise if your primary concern, I'd go the Remsa, which are a high performance European pad (rated to 650 degrees, or 100 degrees higher than Bendix Ultimate) but have a lot noise reducing features like soft shims, relief grooves, and side shamfers. To suit those 4 pots are $89 for the set.

Finally got around to fitting new rear rotors and pads (both TRW) to my NM35 Stagea, was a fairly easy job once I'd loosened the caliper bolts. My shuddering in the steering wheel that has plagued me for ages seems better although have only been around the block to make sure it still stops as haven't got the time for bedding in or a decent run. Cost me a lot more for the parts than it did for the front rotors that seems weird to me.

Does anyone know how to adjust the footbrake as it doesn't seem to be working as well?

The Bendix pads were just over $100,The RDB $45, and they are a bit better than the Bendix. I dont have an issue with the noise as, when I get to drive the Stag, it is usually for 40-50 Km trips.Whereas Mrs66 only drives about 3 Km to the Gallery and back. So maybe it is caused by temperature and low speed

as in ur brake pedal or foot pedal for handbrake? did u re-adjust it at the rear rotors when u replaced the rotors? there is an adjuster u need to turn to spread the linings

As in the foot pedal that does the handbrake, I had to loosen it to get the new rotors on using the adjuster thingy behind the rotors but seems its too loose, my question is how do i tighten it ? can i do it without taking the rotors off, like from the pedal end?

There will be a little grommet in the disc face where the whell mounts against, remove that and tighten the drum shoe up until it just locks. Then back it off 5-6 clicks and your done. Abviously do both sides the same and with the handbrake off.

Anyone looking for cheap pads/rotors, there's a kit going on eBay at the moment for $155 posted.

http://www.ebay.com.au/itm/NISSAN-STAGEA-import-M35-Disc-Brake-Rotor-Pad-Pack-/280777240717?pt=AU_Car_Parts_Accessories&hash=item415fa0b08d#ht_500wt_1180

No idea about the quality - I imagine not that decent, but if it's enough to get you by until a decent upgrade it's a cheap way of going about it!

There will be a little grommet in the disc face where the whell mounts against, remove that and tighten the drum shoe up until it just locks. Then back it off 5-6 clicks and your done. Abviously do both sides the same and with the handbrake off.

Is an S1 similar???

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm looking for some real world experiences/feed back from anyone who has personally ran a EFR7670 with a 1.05 exhaust housing or a .83 I'm leaning towards the .83 because its a street car used mostly for spirited driving in the canyons roads. I"m not looking for big numbers on paper. I want a responsive powerband that will be very linear to 8000 rpm. I dont mind if power remains somewhat flat but dont want power to drop off on top. The turbo I've purchased is a 1.05, although the mounting flange T3 vs T4 and internal vs external waste gates are different on both housings, I not concern about swapping parts or making fabrication mods to get what I want. Based on some of the research I've done with chat gpt, the 1.05 housing seems to be the way to go with slightly more lag and future proofing for more mods but recommends .83 for best response/street car setup. AI doesn't have the same emotions as real people driving a GTR so I think you guys will be able to give me better feed back 😀   
    • Surely somebody has one in VIC. Have you asked at any shops?  Is this the yearly inspection or did you get a canary?
    • This is where I share pain with you, @Duncan. The move to change so many cooling system pieces to plastic is a killer! Plastic end tanks and a few plastic hose flanges on my car's fail after so little time.  Curious about the need for a bigger rad, is that just for long sessions in the summer or because the car generally needs more cooling?
    • So, that is it! It is a pretty expensive process with the ATF costing 50-100 per 5 litres, and a mechanic will probably charge plenty because they don't want to do it. Still, considering how dirty my fluid was at 120,000klm I think it would be worth doing more like every 80,000 to keep the trans happy, they are very expensive to replace. The job is not that hard if you have the specialist tools so you can save a bit of money and do it yourself!
    • OK, onto filling. So I don't really have any pics, but will describe the process as best I can. The USDM workshop manual also covers it from TM-285 onwards. First, make sure the drain plug (17mm) is snug. Not too tight yet because it is coming off again. Note it does have a copper washer that you could replace or anneal (heat up with a blow torch) to seal nicely. Remove the fill plug, which has an inhex (I think it was 6mm but didn't check). Then, screw in the fill fitting, making sure it has a suitable o-ring (mine came without but I think it is meant to be supplied). It is important that you only screw it in hand tight. I didn't get a good pic of it, but the fill plug leads to a tube about 70mm long inside the transmission. This sets the factory level for fluid in the trans (above the join line for the pan!) and will take about 3l to fill. You then need to connect your fluid pump to the fitting via a hose, and pump in whatever amount of fluid you removed (maybe 3 litres, in my case 7 litres). If you put in more than 3l, it will spill out when you remove the fitting, so do quickly and with a drain pan underneath. Once you have pumped in the required amount of clean ATF, you start the engine and run it for 3 minutes to let the fluid circulate. Don't run it longer and if possible check the fluid temp is under 40oC (Ecutek shows Auto Trans Fluid temp now, or you could use an infrared temp gun on the bottom of the pan). The manual stresses the bit about fluid temperature because it expands when hot an might result in an underfil. So from here, the factory manual says to do the "spill and fill" again, and I did. That is, put an oil pan under the drain plug and undo it with a 17mm spanner, then watch your expensive fluid fall back out again, you should get about 3 litres.  Then, put the drain plug back in, pump 3 litres back in through the fill plug with the fitting and pump, disconnect the fill fitting and replace the fill plug, start the car and run for another 3 minutes (making sure the temp is still under 40oC). The manual then asks for a 3rd "spill and fill" just like above. I also did that and so had put 13l in by now.  This time they want you to keep the engine running and run the transmission through R and D (I hope the wheels are still off the ground!) for a while, and allow the trans temp to get to 40oC, then engine off. Finally, back under the car and undo the fill plug to let the overfill drain out; it will stop running when fluid is at the top of the levelling tube. According to the factory, that is job done! Post that, I reconnected the fill fitting and pumped in an extra 0.5l. AMS says 1.5l overfill is safe, but I started with less to see how it goes, I will add another 1.0 litres later if I'm still not happy with the hot shifts.
×
×
  • Create New...