Jump to content
SAU Community

Recommended Posts

Well finally i bit the bullet and bought some Toyo Proxies RA1. These are a race tyre but are street legal similiar to the Bridgestone RE55. Im not expecting a very long life out of them but when you spend a fair bit of time spinning wheels, these are a huge releif. With the old Sumitunos HRZ 11's 255/40/17, 2nd gear wheel spin was at will as soon as boost hit. Good for showing off but not good for winning races. Now with these RA1's, i have 1st gear traction on the street and it is a rocket, no more hiding at traffic lights. Just for the record, i know RWD cars doing 1.6 60's with these tyres. Im not expecting 1.6, but if i can get 1.7/1.8 60's look out for a very low 12 and then i can drive it home. Perfecto.

Link to comment
https://www.sau.com.au/forums/topic/82245-traction-like-a-gtr-from-a-gtst/
Share on other sites

The drag spec Nitto's is what you want for straight line.

They handle quite well also.

Whatsisname had them on his car when it was making some where from 260-290rwkw and ran a low 12 with his granny shifting. :P

I remember him telling me he can get almost all the power from first down and second also.

The drag spec Nitto's is what you want for straight line.

They handle quite well also.

Whatsisname had them on his car when it was making some where from 260-290rwkw and ran a low 12 with his granny shifting. :P

I remember him telling me he can get almost all the power from first down and second also.

Where do you buy Nittos from? and how much are they roughly?

I just found this on Toyo's website:

The Proxes RA1 has the same construction & tread compound as the Nitto NT555R Extreme Drag Radial, and therefore provides very similar performance.

Don't know if I believe it but interesting... anyone know the price diff?

The Proxes RA1 has the same construction & tread compound as the Nitto NT555R Extreme Drag Radial, and therefore provides very similar performance.

If Toyo's RA1 (which they advertise as a clubsport circuit racing tyre) has the same construction and tread compound as Nitto's NT555R (which is reknown as a drag tyre), then one of them is going to suck at their advertised function.

Drag tyres make shit circuit tyres, because of their weak sidewalls. And vice versa.

With the rubber compound and tread pattern, I don't doubt that the circuit tyre will provide good grip compared to your regular street tyre off the line, but its still not ideal.

If Toyo's RA1 (which they advertise as a clubsport circuit racing tyre) has the same construction and tread compound as Nitto's NT555R (which is reknown as a drag tyre), then one of them is going to suck at their advertised function.

Drag tyres make shit circuit tyres, because of their weak sidewalls. And vice versa.

With the rubber compound and tread pattern, I don't doubt that the circuit tyre will provide good grip compared to your regular street tyre off the line, but its still not ideal.

Refer to my original post, I know guys using these tyres at the drags and producing awesome launches. As for me, my car now bites hard.

If they cant do both (drag and cornering) why do alot of quick street cars use RE55's and also Ben from RacePace uses these on his track GTR.

The Toyo's are a great "cold start" tyre. On the track they are awesome for the first 2-3 laps. From that point on they go off like "Mums pants on Father's Day". Excellent hill climb tyre and for street -the only thing to look out for would be to make sure they are not overworked too much. A lot of high speed continuous cornering would see them go off. Once they do, they become very "squidgy".

Good tyre though - except they will probably wear fairly quickly.

The Toyo's are a great "cold start" tyre. On the track they are awesome for the first 2-3 laps. From that point on they go off like "Mums pants on Father's Day". Excellent hill climb tyre and for street -the only thing to look out for would be to make sure they are not overworked too much. A lot of high speed continuous cornering would see them go off. Once they do, they become very "squidgy".

Good tyre though - except they will probably wear fairly quickly.

So far i have noticed, i can still get wheelspin in 2nd when they are cold, but once they warm up, grip is phenominal. Im yet to try them down the 1/4 as yet but im predicting a nice drop in my times. I dont track race so i can't adivse you, but i only have them on the back so i would be understeering quite badly.

The Toyo's are a great "cold start" tyre. On the track they are awesome for the first 2-3 laps. From that point on they go off like "Mums pants on Father's Day". Excellent hill climb tyre and for street -the only thing to look out for would be to make sure they are not overworked too much. A lot of high speed continuous cornering would see them go off. Once they do, they become very "squidgy".

Good tyre though - except they will probably wear fairly quickly.

So which tyres are good for track days?

Those bloody A032Rs....did you guys run the 48s? I am interested to see if they will be any better....I am hoping Gordon will be out of stock of the 32s when I need to buy the next set :P

Pete and Terry were having a tricky time with the 48s apparently?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...