Jump to content
SAU Community

Recommended Posts

Hi everyone,

After a debate with one of my friends we could not come to a conclusion on this matter.

Does the GTR have a sequential turbo set up?

by sequential i mean that it has a small turbo to spool up quickly, while the second, larger turbo kicks in after - to overcome the problem of lag and to give 'constant' boost..

I have always been under the impression that GTR's DID have a sequential turbo set up but after chattin to paulr33 (i think thats his name) he has seemed to convince me otheriwse..

Link to comment
https://www.sau.com.au/forums/topic/82855-gtrs-sequential-turbo-set-up/
Share on other sites

the GTR's use a true twin turbo arrangement meaning that it is NOT a sequential turbo system. So that is why the GTR's are more laggy down low in the revs as they have got each turbo working with only 1.3L and 3 cyclinders.

Toyota's 2jz-gte engine on the other hand has a sequential turbo setup, however, instead of having a smaller turbo matched with a larger turbo, i believe the stock turbos are the same size.

A true sequential turbo system was the B4 liberty - they had 2 different sized turbo's and there was alot of complaints because there was a point in the rev range where the first one would cut-out and the second one had to spool out - meaning you'd get a second of slight power loss..

GT-R's are twin turbo - both spool @ the same time with the same boost levels..

  • 1 year later...

The cost vs the results in doing such a setup simply put... isnt really worth it. It would require a fair bit of rooting around

Hence there arent a lot of cars around with this setup, as its costly.

Most people soon as they chase power, dispose of the sequential from the outset

A true sequential turbo system was the B4 liberty - they had 2 different sized turbo's and there was alot of complaints because there was a point in the rev range where the first one would cut-out and the second one had to spool out - meaning you'd get a second of slight power loss..

GT-R's are twin turbo - both spool @ the same time with the same boost levels..

been as passenger in a mate's old B4. didn't notice any power loss, infact as soon as the 2nd turbo kicked in at about 4-5grand it would just push you back into your seat. thats how i remembered it anyway ;)

been as passenger in a mate's old B4. didn't notice any power loss, infact as soon as the 2nd turbo kicked in at about 4-5grand it would just push you back into your seat. thats how i remembered it anyway ;)

It's a pretty common annoyance for B4 owners, I test drove one and found it to be quite noticeable, just over 4K IIRC.

VGT anyone?

It's a pretty common annoyance for B4 owners, I test drove one and found it to be quite noticeable, just over 4K IIRC.

VGT anyone?

I have found the same with the b4's, there is a hole at 4-4400 rpm.

It's a pretty common annoyance for B4 owners, I test drove one and found it to be quite noticeable, just over 4K IIRC.

I found this true also, a mate of mine has a legacy gt with the twin turbo sequential setup and between 4 and 5 grand it feels like its off boost. Seems kinda odd as they gave it a smaller turbo to be on boost earlier but then it lags in the middle of the rev range anyway... :)

Several companies have tried to get sequential turbos to work, and most of them have failed. Whether its a torque hole during the transition (i.e. B4) or the convoluted plumbing that has a reputation for failing (RX7), eventually people give up on it.

I don't know why you'd want to have sequential turbos that are the same size (a la the 2JZ-GTE) - if you want something to spool faster before you get the big power, why not get a smaller turbine matched to a bigger one? If they're the same size you may as well put them in parallel (like the RB26DETT) rather than in series, and just use smaller turbos.

Of course, the new BMW 335 has a sequential setup and by all accounts its a smooth engine. I wouldn't mind taking one for a drive and giving it a go, but it might be a sequential turbo setup worth buying.

Yeah as mentioned the 2jz uses sequential turboes of the same size, Toyota did this to gain low down power and anyone thats drivin a supra will also know around 4000RPM there is a drop in power when the 2nd turbo comes online.

Turbos have come a long way since the mid 90's tho hence the reason people put on big singles on the 2jz. A GT35R wont spool much slower than a stock sequential system on a 2j but will make alot more power.

There would be alot of R&D needed to make a sequential setup for a GTR, IMO money would be better spent on a 3L bottom end if you wanted quicker spool

Edited by eddieneedsboost

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, it's getting like that, my daughter is coming over on Thursday to help me remove the bonnet so I can install the Carbuilders underbonnet stuff,  I might get her to give me a hand and remove the hardtop, maybe, because on really hot days the detachable hardtop helps the aircon keep the interior cool, the heat just punches straight through to rag top I also don't have enough hair for the "wind in the hair" experience, so there is that....LOL
    • Could be falling edge/rising edge is set wrong. Are you getting sync errors?
    • On BMWs what I do because I'm more confident that I can't instantly crush the pinch welds and do thousands of USD in chassis damage is use a set of rubber jacking pads designed to protect the chassis/plastic adapter and raise a corner of the car, place the aforementioned 2x12 inch wooden planks under a tire, drop the car, then this normally gives me enough clearance to get to the front central jack point. If you don't need it to be a ramp it only needs to be 1-1.5 feet long. On my R33 I do not trust the pinch welds to tolerate any of this so I drive up on the ramps. Before then when I had to get a new floor jack that no longer cleared the front lip I removed it to get enough clearance to put the jack under it. Once you're on the ramps once you simply never let the car down to the ground. It lives on the ramps or on jack stands.
    • Nah. You need 2x taps for anything that you cannot pass the tap all the way through. And even then, there's a point in response to the above which I will come back to. The 2x taps are 1x tapered for starting, and 1x plug tap for working to the bottom of blind holes. That block's port is effectively a blind hole from the perspective of the tap. The tapered tap/tapered thread response. You don't ever leave a female hole tapered. They are supposed to be parallel, hence the wide section of a tapered tap being parallel, the existince of plug taps, etc. The male is tapered so that it will eventually get too fat for the female thread, and yes, there is some risk if the tapped length of the female hole doesn't offer enough threads, that it will not lock up very nicely. But you can always buzz off the extra length on the male thread, and the tape is very good at adding bulk to the joint.
    • Nice....looking forward to that update
×
×
  • Create New...