Jump to content
SAU Community

Recommended Posts

here i have an old 79 skyline and i have no idea what model it is or any details about it. does anyone know what its specs are if its a good car and what ppl think of the model

thanks

C210 Skyline. Had one exactly like it many years ago. Quite good cars compared with what was available from Ford/Holden at the time. Possibly a little cramped inside, but well fitted out. IMHO the model was let down badly by the engine (carb'd....L24S), which was underpowered and performance suffered particularly as an auto. Manuals were a bit better. All-in-all good, solid cars, but benefit greatly from a power upgrade. Steering is another weak area being recirc ball with many links in the system.

Link to comment
https://www.sau.com.au/forums/topic/83064-old-skyline/#findComment-1503734
Share on other sites

thanks for the info steve.

being a newbi in the world of nissans what type of engine swaps/upgrades are avaliable. do they take kindly to being turbocharged.???? or can the current enging be brought back to life with some mode... it was just rebuilt b4 i got it ... done approx 10,000kms.. so they said :(

Link to comment
https://www.sau.com.au/forums/topic/83064-old-skyline/#findComment-1503740
Share on other sites

thanks for the info steve.

being a newbi in the world of nissans what type of engine swaps/upgrades are avaliable. do they take kindly to being turbocharged.???? or can the current enging be brought back to life with some mode... it was just rebuilt b4 i got it ... done approx 10,000kms.. so they said :D

When I had mine turbocharging was unheard of. I fitted a modified L28 engine with 240Z carb's and it went very well after that :(. After I got tired of carbs I fitted it with a hybrid EFI system using cheap (at the time) D-jet system parts....but that's a fair bit of work.

It's possible to fit aftermarket cams to the stock L24 and get some improvement, but in the end the L24S is severely restricted by it's intake ports, valve sizes and relatively low CR. I suppose turbo-charging is an option, but personally I wouldn't bother as it's possible to drop in an RB20DET relatively cheaply - probably cheaper than modifying an L24 to do the job properly. I think it's been discussed before, so suggest doing a search in the first instance. Another option is L28 turbo, but finding the parts is an issue.

Link to comment
https://www.sau.com.au/forums/topic/83064-old-skyline/#findComment-1503764
Share on other sites

/wakes up......oh look another C210...theyre popping up everywhere lately....i just bought another coupe.

currently i have 77 coupe (KMGC210), 79 coupe(KMGC210) and a 81 Sedan(MGC210).....

Welcome to the forums....there is a wealth of info here, and many people willing to help....

Link to comment
https://www.sau.com.au/forums/topic/83064-old-skyline/#findComment-1505310
Share on other sites

hey there thanks for the welcome.. any idea how easy it is to put a rb20 into the old c210's.. or any other ideas you might have for a power up.. as i dont really fancy driving a 1.2 tonne car with only 97kw of power :)

also does anyone have any idea whre i could get a turb set up for one???

or a rb20

Link to comment
https://www.sau.com.au/forums/topic/83064-old-skyline/#findComment-1505447
Share on other sites

as far as i know the gearbox xmember will accept the rb20 box, and you only have to slot the drivers side engine mount 10-15 mm......but my memory sux so i may be wrong.

I am currently fitting an RB30 to my second coupe. so ill let you know how that goes

Link to comment
https://www.sau.com.au/forums/topic/83064-old-skyline/#findComment-1506551
Share on other sites

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...