Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

I feel sorry for your diff.

there is going to be some serious torque there with the blower.

I havent read the thread but that looks like a VQ45. beutiful engine. That engine put out 206kw at standard in the "gentlemens agreement" it and it was under rated quite a lot.

I put in a guess at 320RWKW. ;)

Sweet mate looks really good. I am in talks with a mate at the moment about putting this model v8 or a lexus v8 in a r33 gtr and make the 4 wheel drive work and add a turbo. Whats the room like around the brake booster and the clutch master cylinder, and how much clearence is there around the exhuasts on both sides???

Good luck, its a bloody good idea!!!

No room for turbos thats for sure, not without body mods and i want this to be 100% street legal so im not going anywhere near that. I built a custom set of headers to turn down really sharp otherwise they would be sitting on the rails.

Be nice to see one in a GTR, lots and lots of fabrication... just not something im bothered with atm... Ive still got my GTR and im trying to get rid of it, it just doesnt interest me as much as this does.

Well it would be a big single turbo so both exhausts would kind of be like a log manifold facing foword, and then run the dump back under the passenger side engine mount or something aroun there. The biggest hastle for me as although its his car I will be doing all the work is cutting and shutting the sump to suit an engine that 1 has a totally different bolt pattern on the bottom then secondly is 2 cylinders shorter in length but wider!!!

My friend has a T-trim on a holden/isuzu rodeo 3.2 6cyl which was stroked to 3.7l and it pushes just over 400rwkw with 25psi.

But oh my god are those things damn loud at just idle!! The BOVs vent constantly and they scream. To the uninitiated it sounds like something is wrong from the loud grinding sound from the supercharger.

Somebody mentioned about your diff and torque. This rodeo had a new ford 9 inch and on its first pass (slicks) it smashed the living daylights out of it. Fitted up a strange full spool and next time out spat out an axle. Fitted in some moser axles and tried again and then it ripped the front of the diff housing off. This is with a six so yeah its gonna make some grunt with your package.

A t-trim at full noise on your motor in an R33 will run deep into the 11's if not a 10 if you can put it down.

I had considered putting a Q45 engine into a CPV35 Skyline but was told they weigh so much more than a VQ35DE engine.

Did you weigh the engine at all as I would be interested to know.

A V35 V8 non supercharged would be a nice daily driver i think.

Cheers

Messy engine WTF??? Looks factory to me?

R34 - wouldn't be much point throwing the V8 into the V35, yes it would push a bit more power, but you may as well just go with forced induction on the VQ35. Even if you're looking at a cost point of view, pick up a lower spec V35 without the VQ35 and throw in a late mode VQ25DET from a stagea :rant:

I like people doing something different like this. Well done. As for the power it will produce, any decent engine with forced induction will produce easily 100rwkW per litre...so it means 450rwkW for this sucker!!!!! GTR drivers start pissing your pants. As for if its a strong enough engine....coated pistons from the factory and 6 bolt bottom end. Thats stronger than your RB26!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Inspiration: https://www.nissan-global.com/EN/HERITAGE_COLLECTION/Primera_GT.html    
    • Yeah, hard to find and a pain in the ass to change with the transverse engine. I’ve worked on a GTiR before and it’s not a job I’d ever want to do again. theres a company in South Africa that makes RS3 gearbox adaptors for the AWD SR20 including gearbox mounts, so I could modernise it and go a dual clutch with paddles. For now tho, it ticks all the boxes. Super cheap, can throw the kids and their junk in the back, and SR20 that I can turbo cheaply, a CVT that’s not a dog’s breakfast like the V35, and has 80% interchangeable parts with stuff I can source from the wreckers cheaply…. But it’s still unique. I love the wagon back of the Autech version. It’s cheap enough that I can buy another stock manual FWD Primera with SR20VE, swap the gearbox to the N15 pulsar short gear ratio box, swap out the brakes to the R32 ones I pulled off my 32, register it on club plates and take it racing. $1300 shipping from NZ. Heaps of parts and aftermarket builders for transverse SR20’s in NZ.
    • Hard to say, just pop the rocker covers off and have a look if you think it's cammed. You probably need to replace the valve cover gasket/half moons anyways.
    • From my youth: GTi-R clutch change is a massive pain. The gearboxes are fragile? But the car is super cool and I want one 😢 
    • Remember this is 1988 tech.
×
×
  • Create New...