Jump to content
SAU Community

Recommended Posts

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

I feel sorry for your diff.

there is going to be some serious torque there with the blower.

I havent read the thread but that looks like a VQ45. beutiful engine. That engine put out 206kw at standard in the "gentlemens agreement" it and it was under rated quite a lot.

I put in a guess at 320RWKW. ;)

Sweet mate looks really good. I am in talks with a mate at the moment about putting this model v8 or a lexus v8 in a r33 gtr and make the 4 wheel drive work and add a turbo. Whats the room like around the brake booster and the clutch master cylinder, and how much clearence is there around the exhuasts on both sides???

Good luck, its a bloody good idea!!!

No room for turbos thats for sure, not without body mods and i want this to be 100% street legal so im not going anywhere near that. I built a custom set of headers to turn down really sharp otherwise they would be sitting on the rails.

Be nice to see one in a GTR, lots and lots of fabrication... just not something im bothered with atm... Ive still got my GTR and im trying to get rid of it, it just doesnt interest me as much as this does.

Well it would be a big single turbo so both exhausts would kind of be like a log manifold facing foword, and then run the dump back under the passenger side engine mount or something aroun there. The biggest hastle for me as although its his car I will be doing all the work is cutting and shutting the sump to suit an engine that 1 has a totally different bolt pattern on the bottom then secondly is 2 cylinders shorter in length but wider!!!

My friend has a T-trim on a holden/isuzu rodeo 3.2 6cyl which was stroked to 3.7l and it pushes just over 400rwkw with 25psi.

But oh my god are those things damn loud at just idle!! The BOVs vent constantly and they scream. To the uninitiated it sounds like something is wrong from the loud grinding sound from the supercharger.

Somebody mentioned about your diff and torque. This rodeo had a new ford 9 inch and on its first pass (slicks) it smashed the living daylights out of it. Fitted up a strange full spool and next time out spat out an axle. Fitted in some moser axles and tried again and then it ripped the front of the diff housing off. This is with a six so yeah its gonna make some grunt with your package.

A t-trim at full noise on your motor in an R33 will run deep into the 11's if not a 10 if you can put it down.

I had considered putting a Q45 engine into a CPV35 Skyline but was told they weigh so much more than a VQ35DE engine.

Did you weigh the engine at all as I would be interested to know.

A V35 V8 non supercharged would be a nice daily driver i think.

Cheers

Messy engine WTF??? Looks factory to me?

R34 - wouldn't be much point throwing the V8 into the V35, yes it would push a bit more power, but you may as well just go with forced induction on the VQ35. Even if you're looking at a cost point of view, pick up a lower spec V35 without the VQ35 and throw in a late mode VQ25DET from a stagea :rant:

I like people doing something different like this. Well done. As for the power it will produce, any decent engine with forced induction will produce easily 100rwkW per litre...so it means 450rwkW for this sucker!!!!! GTR drivers start pissing your pants. As for if its a strong enough engine....coated pistons from the factory and 6 bolt bottom end. Thats stronger than your RB26!!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
    • To be fair it's the other way around. 300kw is boring in a modern Golf or BMW. They are so competent / well-engineered / devoid of emotion that you have to go stupid fast to feel anything. Whereas the <300kw RB still makes all the right noises and it feels good to drive. Can pull off at the lights with the turbo whooshing and the blow-off pssshing and feel like the coolest kid on the block. Just don't look to the side where you'll see the bored housewifes in their shitbox Yaris/Corolla/Camry that kept up because you didn't go fast at all
×
×
  • Create New...