Jump to content
SAU Community

Recommended Posts

Hi all, I'm currently driving a R33 GTS (N/A) and intended to get a RB26DETT from a R34. Do anyone of you guys know where I can do this upgrade or who can help me with this subject? By the way, approximently how much is needed for the upgrade? It's my 18 months for the R33. Thanks for all the help I can get.

Link to comment
https://www.sau.com.au/forums/topic/83535-gts-upgrade-to-gtr/
Share on other sites

Yeh u could call hyperdrive in malaga i think www.hyperdrivems.com.au or any performance workshop.

Dont take this the wrong way but i think ure wasting ure time. *shrugs* its not worth the trouble. Putting an r34 engine in a car doesnt make it an r34. Unless of course its an r34 :mellow:

Oh and id say ud want to be putting aside $10k at least for this conversion.

Biggest problem would be the gearbox, tailshafts, diff, suspension and brakes would all be suited to alot less powerful engine. That means you'd have to replace everything mentioned.

Smells like expensive to me...

I'm thinking of changing engine, suspension, brakes, AWD, and gearbox first. After changing the main parts, then continue with the engine upgrade.....:P Anyway, need some advice because I'm going to break all the process down (DUE TO HIGH COST) but want to know which part can be change first and which must be change along with other parts such as engine?

How bout u change ure mind and buy a GTR straight out :P It gonna be cheaper. and u will get better result.

Sure it would be interesting to see how u go. But on that note its also interesting to watch ppl set themselves on fire. :P

guys, help this bloke out. All he is doin is asking for advice. Contact hyperdrive or c-red or xspeed. They can give you an extimate, but be sitting down when they give ya estimates. Show them your serious and they will no doubt be readi to help you out. try pm gtrken and see what he has too say about it.

Im trying to help him out, i jsut dont believe that its feasible at all.

Things to consider:

Gearbox will not fit must be made to.

Diff will not be easy, there are about a million litte sensors int eh attessa diff such as lateral g sensors, diff sensors, driveshaft sensors the list goes on. While the chassis is the same the wheel base/track is different from the car those sensors are designed to be in so that going to be very interesting.

Brakes and susp are another 3-4k easy.

To top it off the car will be practically uninsurable and u will miss out on gooodies like better seats and instument clusters. It wont look like a GTR on the outside unless u make it in which case it will look like u have riced it up.

But yeh after all that if ure still keen id give the guys above a call. they are all in teh phone book or just google it

Madness, anythings possible if you have an unlimited budget

The 4wd chassis have different front chassis rails to accomodate the front drive shaft access to the front wheel hubs so add in a matter of body building. Supply of parts and fitting I dont think somewhere in the 20k area isnt far fetched. eng box clutch rear cradle brakes efi wire then body wire body mods bulk labour hrs, banannas

as for help booster and jimi giving a splash of realism should be taken as a gift, as for "not having money for gtr etc this conversion would be a "all at once" deal, one hard $ hit. Id want to be clear I wanted to do this before asking for a quote as it may take the supplier a few hrs to write up accuratley

have fun

ok siaw i will put your idea into a more understandable way...

what you want to do is put a 19 yr old young heart into a 90yr old tired body... the young heart will put stress on the rest of the body as all the other parts will not take it...

then you are saying lets change the knee caps and ankles to 19yr olds as well...

it will have problems and break later on...

at the end of the day if it was easy and cheap why wouldnt everyone be driving RB26 GTSt?

i think this is what everyone is trying to say...

also if done half proper you will never be able to sell your car...

Though it may sound like an easy process to install a massive turbo the 2 engines are not the same internally and stuff still has to be changed, no to mention the new ECU.

Im making a guestimate of around $5-7k to install a turbo properly.

I think Jimih suggesting is prolly what u will have to do if u want a turbo. The problem with any conversions or even modifications are the teething problems, alot of this stuff u cant just bolt on and needs litte extras here and there.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...