Jump to content
SAU Community

Recommended Posts

anyone have pics or have fitted 18 x 9 +30 with a 235/40 on the front of a 32 gtst?

i got mine on atm, adn its mm's from touching the uca, but i just would like to see how low people have gona with at the front

i am running coilovers so i can adjust, but cant drive car as engine pieces getting powdercoated

Nick

i'm looking at getting some meisters for my r33

looking at

19x8.5 or 9 at the front

19x9.5 or 10 at the back

what kind of offset is required? it wont be slammed i want to roll the lip on the guard

heres how it rides atm wit 18s 265s on the rear and 235s on the front no idea on offset of rims

n822125108_1809247_8221.jpg

okok thanks for that if those offsets are for sitting flush with the guards i mite go a bit lower in offset so its sticks out like 5mm

so something like 19x8.5 +25 and 19x9.5+30 and hopefulli i wont hit the guards when i put the dampers on the hardest setting

okok thanks for that if those offsets are for sitting flush with the guards i mite go a bit lower in offset so its sticks out like 5mm

so something like 19x8.5 +25 and 19x9.5+30 and hopefulli i wont hit the guards when i put the dampers on the hardest setting

the issue is 19's arent great for fitment because u cant gain as much clearance by stretching tyres

from another thread in this section:

fitting a 9.5 +22 with a 225/45 tyre would actually be pretty easy, my main concern is being a 19" wheel, even though it will be the same amount of stretch, the angle will be sharper, like so:

fitment.jpg

the blue is a smaller wheel with a larger profile, and the red is a larger wheel with smaller profile but same size tread. the green is at sitting height, the yellow is on compression, the angle change in the 2 guards is due to dynamic camber, obviously in real life its the wheel/tyres angle that changes, but its easier to just show the guard changing angle.

as u can see the lesser angle of the sidewall on the tyre on the smaller wheel allows the guard to come down further, even though the offset, rims width and tread width are all the same. hence why its really hard to get agressive fitment on higher diametre wheels.

so its hard to really get the fitment right with them. with the specs i gave u, depending on the camber they will probably just stick out of the guard a few mm at the rear.

Hey everyone. First time posting here I believe. PM'd a few guys about things, but that's it.

Anyway, I have a set of TE37's I was planning on putting on my widebody Sileighty (S13.5), but since decided to go another route.

I currently have a '93 R33 GTS-T Type M coming across the Pacific and was wondering how well my wheels would fit.

In the front I have 17x9 +0 and in the rear, 17x9.5 +12.

I have no clue about Skyline offsets and to be honest, did not want to take the time to go through so many pages.

If someone could help me out, that would be super!

Hey everyone. First time posting here I believe. PM'd a few guys about things, but that's it.

Anyway, I have a set of TE37's I was planning on putting on my widebody Sileighty (S13.5), but since decided to go another route.

I currently have a '93 R33 GTS-T Type M coming across the Pacific and was wondering how well my wheels would fit.

In the front I have 17x9 +0 and in the rear, 17x9.5 +12.

I have no clue about Skyline offsets and to be honest, did not want to take the time to go through so many pages.

If someone could help me out, that would be super!

They will stick out the guards by heaps. About +25 to +40 is ok for a 33 GTSt.

Are you from the states?

Hey everyone. First time posting here I believe. PM'd a few guys about things, but that's it.

Anyway, I have a set of TE37's I was planning on putting on my widebody Sileighty (S13.5), but since decided to go another route.

I currently have a '93 R33 GTS-T Type M coming across the Pacific and was wondering how well my wheels would fit.

In the front I have 17x9 +0 and in the rear, 17x9.5 +12.

I have no clue about Skyline offsets and to be honest, did not want to take the time to go through so many pages.

If someone could help me out, that would be super!

u can make them fit, but u will need guard work, silvias usually have more clearance in the rear guards, the fronts are similar how ever.

heres a few pics, R33's have a bit more clearance than the R32's.

17x9.5 +13, 235/45 30-40mm flare (mock up with unfinished guard)

DSCN0153.jpg

17x9 -1, 215/45, 30-40mm flare

DSCN1952.jpg

17x9 +16, 225/45, rolled guards

DSCN9843.jpg

Ive been reading through but just getting mixed answers

I have a 96 r33 gtst series 2. Currently has 17" work's not sure of the offset.

However i dont want to do any gaurd rolling or flaring (dont want to damage the paint) so im assuming i couldnt get anything over an 18"

What size, width and offset would you recomend for stock gaurds?

THANKS :D

Ive been reading through but just getting mixed answers

I have a 96 r33 gtst series 2. Currently has 17" work's not sure of the offset.

However i dont want to do any gaurd rolling or flaring (dont want to damage the paint) so im assuming i couldnt get anything over an 18"

What size, width and offset would you recomend for stock gaurds?

THANKS :(

width and offset play just as big if not bigger roles in clearance than diametre. u can make a 20" fit if u want, u just cant go as wide or have as low offset as a 17".

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks for all the replies fellas. Gonna finish putting it back together and see how it handles the set up. If it starts pinging it’ll be parked.
    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
×
×
  • Create New...