Jump to content
SAU Community

Recommended Posts

I ended up swapping my CR Kai's for Buddyclub P1 Qf's. My only concern now is that I've gone from a +22 to a +17 and haven't had a chance to trial fit. Will they fit ok? Will I have an issue if I want to upgrade to bigger brakes in the future?

shouldnt be an issue but depending on size of brakes? are rims 17 or 18s?

Come with 16's

Yeah, even 265's may be a sqeeze. I got 245 running on 10.5 and it has decent stretch, but not too excessive. 265 is the optimum size (I do believe) for 10's. Do 32 Rs come with 17's from stock?

I ended up swapping my CR Kai's for Buddyclub P1 Qf's. My only concern now is that I've gone from a +22 to a +17 and haven't had a chance to trial fit. Will they fit ok? Will I have an issue if I want to upgrade to bigger brakes in the future?

Assuming same width rim and tyre size, you are just going to poke 5mm more. No real issue if the others were a decent fit.

Need some help in finding the right offset and fitment for my 4 door r32 help would be greatly appreciated was looking at 17 maybe 18 x 9.5 with a +26 offset for my fronts and the the rears a 10.5 with 0 offset any help would be greatly appreciated the rear has been flaired out a little cheers

Need some help in finding the right offset and fitment for my 4 door r32 help would be greatly appreciated was looking at 17 maybe 18 x 9.5 with a +26 offset for my fronts and the the rears a 10.5 with 0 offset any help would be greatly appreciated the rear has been flaired out a little cheers

fronts wont be to much of an issue...rears will be a problem

18x9.5 +12 all round on my 32 (font guards are 25mm wider)

post-2127-0-80210900-1349254434_thumb.jpg

post-2127-0-86429400-1349254497_thumb.jpg

Edited by Frosty

the the rears a 10.5 with 0 offset any help would be greatly appreciated the rear has been flaired out a little cheers

18x10.5+0

Wow. Well you are looking at around 45mm outside the guards, if not more. That is an awful fitment choice, even with the flared guards. Maybe go for 9.5+26 all round.

yeah will fit without any issues

was a mate using my account and no they wont clear the brakes, the wheels were SSR reverse mesh which need a 25mm bolt on to clear 4 pots

ps: anyone got pics of 33 coupe's with r33 gtr's on rear lowered with natural camber? need to know what size bolt on to run to bring the wheel out to the guard, will have around 4 degrees camber and 215/45's

Edited by Kris..

Not Sure if i have put up full specs ect of my wheels so here it is

Skyline model = R33 GTST

Wheel diameter = 15"

Wheel width = 10"

Wheel offset = -26

Tyre size = 195/50 & 205/50

Modifications to try and make them fit = Rolled front and rear guards also pulled the rear guards, as you can see still mexicanr33new11111.jpg1348289833475ed.jpg

1348561845632ed.jpg

was a mate using my account and no they wont clear the brakes, the wheels were SSR reverse mesh which need a 25mm bolt on to clear 4 pots

ps: anyone got pics of 33 coupe's with r33 gtr's on rear lowered with natural camber? need to know what size bolt on to run to bring the wheel out to the guard, will have around 4 degrees camber and 215/45's

reversh mesh would be an issue...

4deg of camber on the front or rear?

Have 4 pot r 32 gtr calipers on the front and want some dish on the front and rears the rims I am looking at are work vs kf

Make sure you get R type (work sell A, O and R type) for the front to clear the brakes. O type on the rear for maximum dish however work no longer makes VS-KF so will have to be 2nd hand unless Leo (JDM Concept) has some in stock

Not Sure if i have put up full specs ect of my wheels so here it is

Skyline model = R33 GTST

Wheel diameter = 15"

Wheel width = 10"

Wheel offset = -26

Tyre size = 195/50 & 205/50

Modifications to try and make them fit = Rolled front and rear guards also pulled the rear guards, as you can see still mexicanr33new11111.jpg1348289833475ed.jpg

1348561845632ed.jpg

more low required :)

standard 33 GTR's are 17x9 +30 so what are you trying to achieve here? what is -4?? offset or camber?

hes talking -4 degrees camber on the rear. and has R33 gtr wheels. which as you said are 17x9 +30, and wants to add spacers to add more poke. which in my opinion is unnecessary. but then, im not mexican.

4 degrees is a silly amount of rear camber......mine has mininal camber(not sure how much) but already very slippery compared to stock

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...