Jump to content
SAU Community

Recommended Posts

Ok well i got bored today with the old silver "SKYLIN" as the paint had worn off the "E"

install5.JPG

^^^^ As you can see!

blue1.jpg

^^^^ Start by removing the rear garnish and using very fine sandpaper remove the existing paint (if any)

blue2.jpg

^^^^ Then once you have done that get special masking tape which doesnt leave a residue (as its a bitch to scrub off later) and carefully mask around the letters

blue3.jpg

^^^^ Keep going... its very tedious lol

blue4.jpg

Finally ... all the letters have been surrounded.. and its ready to undercoat :D

blue5.jpg

^^^^ I chose to undercoat the letters because i didnt know how well the paint would take to the plastic surface, however in hind sight i probably wouldnt have bothered with this step

blue6.jpg

^^^^ Here we see that the undercoat is finished.. and we let it sit for approx 2 hours before the paint goes on

blue7.jpg

^^^^ So that i could get the paint spread across the letters nice and evenly i decided to add extra masking take so that i didnt get any paint on the rest of the garnish

Link to comment
https://www.sau.com.au/forums/topic/84845-r33-painting-rear-garnish/
Share on other sites

blue8.jpg

^^^^ Using a small foam paint brush, spread the paint across the letters nice and evenly

blue9.jpg

^^^^ Finally all the letters have been painted ... let this dry for a further 1.5 hours before applying another coat if needed....

blue10.jpg

^^^^ Once the paint had dried carefully get a stanley knife and carefully cut around all the letters seperating the paint from the masking tape

blue11.jpg

^^^^ Then attach back to car and marvel at how bored you got today

-Ruffels

hey ruffls,

I always thought the silver paint was on the INSIDE of that garnish yet you are clearly sandpapering the outside!!!

So am I correct in saying that the silver paint is on the OUTSIDE of that garnish then??

  • 1 month later...

My one doesn't have paint on the outside. But its actually supposed to have a light in it but thanks to the previous owner its been tampered with and i cant get it open to see because they filled the whole thing with contact glue!

But thats a great idea about repainting it. Very tidy job by the way.

will have pics up tomorrow hopefully... i scrapped the blue colour and now im doing it in white to match my car.. and using spray paint so i get a glossy smooth consistant finish, unlike the paint brush which was a shit idea lol

-Ruffels

nice job mark - cant say i agree with the blue as colour choice though, i also think it looks better with the S2 garnish.

spray works fine - just as remember to have it really clean and apply light coats as it tends to pool around where the letters are raised.

black is easy - you can tint the background and still throw a neon into it.

did this a few months ago - wanted to keep the silver.

but only had gold paint lying around the house, so thought i'd use that instead.

dsc000033qh.jpg

dsc000049da.jpg

dsc000055qz.jpg

dsc000068rp.jpg

Man that gold on black looks nice. Real stylish.

All the other black R33's ive ever seen a just covered in stickers.

Im sad to say that i dont think i will be getting my garnish to light up any time soon :(

The things been cramed with contact glue and i just cant get it open.

If anyone has some ideas im listening.

ohk i scraped that stupid blue shit... and i painted it again, but this time i used a spray can

i think it came up really well

heres a link to what it looks like now :D

http://images.cainer.net/ruffels/paintedgarnishh.JPG

-Ruffels

Is it possible to buy chrome spray? i know that to chrome metal objects, they have to be dipped.. but is it possible to get a spray on chrome that will work on plastic?

What would look really nice, is chrome letters, and the background whatever the colour of the car is.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
×
×
  • Create New...