Jump to content
SAU Community

Recommended Posts

I just had my car tuned...

R33 S1.5

Trust Front Mount

Full Exhaust

Nismo Fuel Pump

HKS 2535

PFC

At 14psi it pulled 244rwkw and is amazing to drive!!!

My new best friend will be the local servo i think!

I thought it would have terrible traction with the crap 326's but it doesnt! it actually pulls very hard with fantastic grip in a straight line. Of course its quiet easy to smoke the tyres through 2nd but the power delivery is so smooth it usually just grabs and goes!!!

I would recommend this setup to anyone for street use! more power everywhere!!!

Cheers!

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/
Share on other sites

Ill have to take a photo of the graph with my phone and post it up...

INASNT; i bought the Apexi N1 off your friend and had them install it yesterday....

It is pretty loud but im sure ill get used to it...

Only mods are those posted... Stock injectors, no FPR or Z32.. max knock was around 30 on the PFC.. i dunno about the max duty of the injectors, i forgot to ask..

I was told it was making about 150ish rwkw by 3000 rpm and max power at about 6,500 rpm. (ill have to check it on the dyno graph though)

boost held to 13psi (from 14psi) till redline which i was not expecting..

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1539896
Share on other sites

it did cost u big bucks??? hahaha

not really...

in this case, you get what you pay for... if you saw how stock my car looks you would know what i mean and considering i have been burnt in the past by previous tuners im more than happy to pay a little more for the service and quality...

Edited by silva33
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1539943
Share on other sites

i just got my power fc tuned with my 2535 bolted up. Ended up with 231.1rwkw at 13-14psi. i do have a z32 afm and a nismo fpr and i'm very happy with the results. max knock is 11 and injectors get to max duty of 84% as far as ive seen. Like silvar33 my exhaust is a little restrictive. My tune feels very strong on boost but safe. Chasers tuned the car and they said on other dynos it might squeeze out a few more kw's but im happy with the performance of the car.

For those people who believe that a HKS turbo is a waste of money im happy to take them for a drive and show them the difference. No comparison compared to standard

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540132
Share on other sites

Sounds good reflex..

It would be good to compare the two cars it see how the tunes are different becuase if anything yours should be smoother than mine with the Z32 AFM

yeah mine is really smooth, i thought it be a bit laggy but its pretty good. im making full boost at 3000-3200rpm. oh yeah my traction issues arent to bad, got brand new tyres tho.

ill put up my graph tommorrow arvo, there isnt any significant dips in my curve and theres no spiking

Edited by reflex
Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540546
Share on other sites

i just got my power fc tuned with my 2535 bolted up. Ended up with 231.1rwkw at 13-14psi. i do have a z32 afm and a nismo fpr and i'm very happy with the results. max knock is 11 and injectors get to max duty of 84% as far as ive seen. Like silvar33 my exhaust is a little restrictive. My tune feels very strong on boost but safe. Chasers tuned the car and they said on other dynos it might squeeze out a few more kw's but im happy with the performance of the car.

For those people who believe that a HKS turbo is a waste of money im happy to take them for a drive and show them the difference. No comparison compared to standard

hi reflex,

what injectors are you using?

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540667
Share on other sites

this is what ive come up with.

i bought my series 1 r33 18 months ago with basics

-3 inch exhaust

-boost controller

-pod filter

-rims

-bov

-fuel pump

-surge tank

-turbo timer

since then ive bought

-intercooler $400

-piping $250

-fpr $150

-power fc $1000

-hks 2535 $1300 exchange for standard

-z32 afm $220

-tuning $500

TOTAL - $3820

everything else is standard though

ive achieved 231 rwkw relatively cheaply, ive wasted plenty of money other crap like body kit, sound system, clearing defects, servicing etc.

for anyone out there looking to achieve strong, safe reliable results this is one option that you should look into.

this website is great for finding second hand parts in good condition

by the way my engine bay looks completely stock except for red rocker covers

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540706
Share on other sites

Dyno graph pls !

Sounds almost too good to be true dude ! with stock injectors no FPR or AFM !

He said he will post it up so give him a chance buddy <_<

Impressive power figure you and reflex have there.

Hope i get something similar out of the lil ol Rb20 of mine :P

Cheers B

Link to comment
https://www.sau.com.au/forums/topic/85009-hks-2535-results/#findComment-1540717
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • roof rail delete used to be a thing, they were made locally for a while too
    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...