Jump to content
SAU Community

Recommended Posts

hey guys,

soon ill be installing my fmic. the piping isnt an issue, i just need to know how to mount the cooler onto the car. some have said i have to bolt it onto the reinforcement but i was under the impression that it was meant to be mounted on brackets supporting it from underneath.

can anyone help me out?

Link to comment
https://www.sau.com.au/forums/topic/85365-fitting-intercooler/
Share on other sites

they are the only pics i have of the fmic, when the front bar is off its basically dead centre and lines up correctly and doesnt get in the way. dont cut the radiator fan blades either, it should all fit without cutting blades. youll have to cut a hole under the water bottle for the wipers to have the return pipe come through

Thanks Paul.

Hi Security,if you look at the photo from pauls install IMGP0612.JPG looking from the top of the intercooler you can see the 2 steel plates that stick out going back towards the car.

They are used to mount the intercooler back more,you will have to cut them up yourself they are not very long at all,and what they do is give the front of the intercooler space to sit behind but still under the reo(reinforcement bar) and add support.

Use all mounting locations on the intercooler.

I have made up a ''top veiw'' paint program drawing to give you an idea.You can see how the intercooler sits behind the front of the reo but still underneath it.Also the top of the endtanks of the intercooler sits snugly between the headlights giving you a good central mounting location.The brackets sit under the reo bar not on top so the front bar can go back on.

The intercooler can also be mounted further back also like on paul33's car.The intercooler doesnt nessesarily have to be mounted half/half under the reo like in my drawing.

HTH...... :)

Intercooler_mounting.bmp

Edited by Trust33
Can anyone give me any tips for fitting cooler behind a series 1 front bar. Looks like you would have to chop it up a bit. Anyone got any pics?

Sorry no pics of a front bar chopped up but:

Probably all you would have to do is cut out the main air intake in the front bar around the area where the core,end tanks and intercooler pipes interfere with the bar.

Once the intercooler + pipes are mock fitted.ie.Fit the intercooler properly and sit the pipes on without properly ring clamping them,sit the front bar on and work out how much needs to be taken off.

You will notice from looking at the gap the bar has b4 it sits snug under the lights and look at the gap on the gaurds to find out how much more you will need to cut off of the bar for it to be able to sit in position properly.

Make sure you only dot where you want the cut and draw the rest with a ruler as much as possible to keep the lines as straight as possible.

The further back the intercooler is on the reo the less you will be cutting off but if you want to fit an oil cooler in between the intercooler and the radiator i would be leaving some room for it in the future.

Erdited...

Edited by Trust33

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
    • Hey. Very valuable information about pitwork, I will pay attention when buying any consumable parts 🙏 As for the carpets - I got a handful of information from nengun, from which it appears that indeed the carpets for the driver's side are OEM. They are not able to show me any pictures due to the long chain of different sales entities but after I place the order, as soon as the goods arrive at the nengun warehouse from which they will send the shipment to me they can send me photos and if my purchase differs from OEM I can immediately return it / cancel the purchase. I think I will give it a try 😉. Of course i'll let you know what's what as soon as i get them P.s. I know the topic is not relevant to the thread, but both nengun and amayama have these SICK 😍 trunk room lamps available. Do you know anyone who ordered them? I need to have one in my car
    • I've managed to find this: Nissan_Stagea_AutechVersion260RS (1).pdf
×
×
  • Create New...