Jump to content
SAU Community

Recommended Posts

Any chance of splitting off a GTR forum? such as the GTROC in UK and Japan.

I just find it too difficult to wade through all the GTST stuff and topics when I am looking purly for RB26 GTR talk.

Am I the only one who finds it frustrating and difficult?

Thanks

no you arent, but its something you just have to put up with. It is a good idea though.

Link to comment
https://www.sau.com.au/forums/topic/85473-gtr-forum/#findComment-1548046
Share on other sites

Any chance of splitting off a GTR forum? such as the GTROC in UK and Japan.

I just find it too difficult to wade through all the GTST stuff and topics when I am looking purly for RB26 GTR talk.

Am I the only one who finds it frustrating and difficult?

Thanks

Far out man, don't be so lazy .... do a search.

Link to comment
https://www.sau.com.au/forums/topic/85473-gtr-forum/#findComment-1548357
Share on other sites

If you read the announcement Prank made about the searches, it'll show you how to search for 3 letter words

it wouldn't be a hassle to set up a single section for GTR's only, however the GTR community in Australia's quite intermingled with the narrowbody community, unlike Japan.

I know the GTR's are a distinct species of skyline, however we have most of the car divided into sections for drivetrain, engine/turbo etc, which means the only posts that will be in the GTR section will be general GTR related questions that don't relate to non GTR's. Which are few and far between.

Link to comment
https://www.sau.com.au/forums/topic/85473-gtr-forum/#findComment-1563047
Share on other sites

There is no need, all it will do is promote will be the avoidance of the search button and lead to people asking questions already answered times before

All information can be found. Plus there are than many hybrid cars with GTR parts on them... are 'they' going to be able to post in there too?

For anything GTR Peformance/Engine was look in FI. I mod it and there is more than enough info if you actually search for it

Link to comment
https://www.sau.com.au/forums/topic/85473-gtr-forum/#findComment-1565561
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...